Not So Pro 3

[lehman live edge slab]

The saw had been sitting for many years. My dad and I put put all our strength into it with a screwdriver. The manual impact screwdriver worked second blow!

And you definitely stood a chance of cracking the magnesium castings they don’t like hard impacts

 

[lehman live edge slab]

I spelled lying wrong. I have never had any loan.

Need to be an adult with a job for that you’ll get there someday

 

[Lnk]

Uncle Andy and uncle Larry are going to raise them

I too, am running out of patience, but they are good practice for my 18 month old grandson. Lol.

FFS!

 

[Lnk]

Good morning men, what fūcking day is it? Fred's Furniture Store is having a grand opening today. Nice try attempting to keep it a secret from the youts Matt.

Good jeans is good if you take care of them. I have had some that lasted a long time. Hand wash only.

 

[lehman live edge slab]

Title of your new sex tape?

Is that the one she ends up pregnant? Extremely hard to remove screws…..

 

[Lnk]

Is that the one she ends up pregnant? Extremely hard to remove screws…..

What's the difference between a pregnant girl and a lightbulb.








You can unscrew a lightbulb.

I am here all week, try the veal!

 

[Mastermind]

Good morning men.

 

[GCJenks204]

Morning / Evening All. I hope all my neighbours in ND and MN are ready, the north winds are kicking up again, 20mph gusting to 35. Temps will be dropping again. The good news is it is actually keeping the weather below us but it looks like most will be warm enough to get rain not snow. Our day time “high” is about 18 degrees cooler than it is now.

 

[lehman live edge slab]

Morning / Evening All. I hope all my neighbours in ND and MN are ready, the north winds are kicking up again, 20mph gusting to 35. Temps will be dropping again. The good news is it is actually keeping the weather below us but it looks like most will be warm enough to get rain not snow. Our day time “high” is about 18 degrees cooler than it is now.

We need moisture or it’s going to be a bad year for fires

 

[Loony661]

Morning / Evening All. I hope all my neighbours in ND and MN are ready, the north winds are kicking up again, 20mph gusting to 35. Temps will be dropping again. The good news is it is actually keeping the weather below us but it looks like most will be warm enough to get rain not snow. Our day time “high” is about 18 degrees cooler than it is now.

High here is supposed to be 51 today.

We need moisture or it’s going to be a bad year for fires.

Fires have already been bad. It’s a fuel box waiting for a spark out here right now…

 

[Mastermind]

I can’t handle it.

Yeah....I'm over it too. I'd hoped it would be good for the youts to get some "real world experience", but I see that allowing them to hang out in this thread was a bad idea.

Neither of them can reply in this thread any longer.

 

[Loony661]

Good morning fellas. I’ve been battling with an electrical issue on the skidder that last couple days. Yesterday I ended up puttinf in new batteries, and having all new battery cables made up - which I decided to measure out and redesign because the knucklepuck that owned it before me changed a cable or 2 and they were too long and bound up in multiple places. Anyway, more electrical trouble shooting for me today. Wish me luck.

 

[Loony661]

Yeah....I'm over it too. I'd hoped it would be good for the youts to get some "real world experience", but I see that allowing them to hang out in this thread was a bad idea.

Neither of them can reply in this thread any longer.

For the best. They just aren’t mature enough to handle it in here. And neither of them listen when given directions, or extremely heavy hints.

 

[Mastermind]

Good morning fellas. I’ve been battling with an electrical issue on the skidder that last couple days. Yesterday I ended up puttinf in new batteries, and having all new battery cables made up - which I decided to measure out and redesign because the knucklepuck that owned it before me changed a cable or 2 and they were too long and bound up in multiple places. Anyway, more electrical trouble shooting for me today. Wish me luck.

I have a 7.3 that is having trouble turning fast enough to fire off. I'm going to chitcan it in favor of a 460 gasser I believe.

 

[Mastermind]

They just aren’t mature enough to handle it in here.

Like Dallas....but younger?

 

[Loony661]

I have a 7.3 that is having trouble turning fast enough to fire off. I'm going to chitcan it in favor of a 460 gasser I believe.

That’s kinda what I’m dealing with - starter will spin but won’t engage the flywheel. Have good grounds now, and good supply voltage to the starter. Starter tested good. Today I’ll be testing and probably making new wiring to the solenoid from the starter button. I don’t think I’m getting enough amperage to kick the bendix out.

 

[Loony661]

Like Dallas....but younger?

High probability.

 

[Mastermind]

That’s kinda what I’m dealing with - starter will spin but won’t engage the flywheel. Have good grounds now, and good supply voltage to the starter. Starter tested good. Today I’ll be testing and probably making new wiring to the solenoid from the starter button. I don’t think I’m getting enough amperage to kick the bendix out.

That's an odd issue. I'd take a closer look at the starter. Have you tried jumping it straight to the starter pole?

 

[Woodrow]

Good morning fellas. Back to regular programming now that the 2 youts are done.

 

[Loony661]

That's an odd issue. I'd take a closer look at the starter. Have you tried jumping it straight to the starter pole?

I am planning to try that this morning as well. Local starter shop tested it - in front of me - and it tested good. Bendix went all the way out, and works as it should. So it should engage if I jump it.