Not So Pro 3

[redline4]

Sup fuggers?


Koda doesn't like plowing snow..

 

[Dream]

Could someone just sack kick him hard enuff to bust all that blockage loose and not have to go the bypass route? I still nominate Ed. But i live a lot closer. I'll do it if necessary.

Hey I dont mind helping out a Slacker brother in need. I'm only 10 or so hours out.
I can be there in the morning if nobody else is willing to try.
We OWE it to the mfer.
Seriously Dallas, let us know how this is going.
Bypass surgery is pretty serious chit.

 

[Only the Tony]

Here's a little interesting tidbit for you boys and girls...your Air Force is in collaboration with Rolls Royce (obviously a multi-billion dollar contract will ensue), for the eight replacement engines (four dual engine pods per a/c), on the entire fleet of B-52 Stratofortress long-range bombers. These Rolls Royce F130 dual pod engines have been in testing for some time now over at the NASA Stennis Space Center in Mississippi....part of extending the service life of the B-52's capabilities into the 2050's....mind you they entered operational service in 1955.

Who'd have thunk a damn centennial strategic bomber...testament to just how bad-ass these B-52's truly are. We see one or two on occasion here at Robins for refueling then they get gone fairly quick afterwards. On occasion if one has an IFE it'll stick around until the issue(s) get handled, but that's a rare occasion...they're a pretty damn solid, heavily updated aircraft.

Did have a few A-10 Warthogs and a couple of F-35's touch down earlier in the week, never heard as to why, and they were gone a few hours later.

There's yer aircraft update for the week.

A lot of those Pratt and Whitney J57 engines made their way through the Teledyne plant in Neosho. Dad was an inspector for several years. Place started out as Rocketdyne/Aerojet. Think Apollo mission times, hard to think that this area helped put man on the moon. Grandfather was head of maintenance during those years. Sad thing is Teledyne sold out and the three or four companies that followed just wanted the contracts. Closed the doors completely about 6 or 7 years ago.

 

[redline4]

Evening fellas. Got a good start on the tater/onion box today. Tomorrow I'll sand and maybe hit it with some walnut stain i had laying around and finish it off with bronze hardware.

Are you just wining that or do you have a blueprint/plan for that?

I wouldn't mind making one of those for my wife but without instructions to follow, I'd be fùcked..
I can tear down engines and transmissions without instructions but can't build a wood box to save my life.

 

[Only the Tony]

Grandfather built the conference room table. I have it and use this half for my dining room table.

 

[Dream]

I go for consultation appointment next Thursday about a triple bypass

I'm not liking that slacker.
But I did read it.
They have come a LONG way with open heart surgery since my grandfather had it done in 1983.
He had quadruple bypass surgery, recovered like the badass WW2 vet and Depression survivor he was, and proceeded to work my arse off for another 6 or 7 years.
Said it was like getting the motor rebuilt in your car. Didnt realise how down on power it was until you got it freshened up.

Please understand that this is a result of an underlying condition, and the results are temporary. They cant fix heart disease, but they have done a damn good job of patching it up.

Moral of the story is, make sure you tell them ALL of your symptoms, not just the ones you arent embarrassed by(because it DOES make a difference how they treat this), and set your hardass head to do what they fuggin tell you to.
They arent ALL *pretty boyes.
SOME of them actually went to school for this chit, and have done it before...

 

[Agent Smith]

Are you just wining that or do you have a blueprint/plan for that?

I wouldn't mind making one of those for my wife but without instructions to follow, I'd be fùcked..
I can tear down engines and transmissions without instructions but can't build a wood box to save my life.

Just winged it as i only had a set amount of 1x12 scraps to work with. I can send some measurements if you want

 

[redline4]

Just winged it as i only had a set amount of 1x12 scraps to work with. I can send some measurements if you want

Thanks, but no worries. I'll check and see if I can find a plan online.
Seeing yours just made me think how my wife would like that.
Our anniversary is coming up and I've got no fuggin ideas anyway..

 

[Dream]

You were serious? What's your concern boss?

Hes being a dik as usual.
It'll be fine.
Its not a Creamsickle, and therefore isn't as SENSITIVE to VARIABLES.

 

[dall]

I'm not liking that slacker.
But I did read it.
They have come a LONG way with open heart surgery since my grandfather had it done in 1983.
He had quadruple bypass surgery, recovered like the badass WW2 vet and Depression survivor he was, and proceeded to work my arse off for another 6 or 7 years.
Said it was like getting the motor rebuilt in your car. Didnt realise how down on power it was until you got it freshened up.

Please understand that this is a result of an underlying condition, and the results are temporary. They cant fix heart disease, but they have done a damn good job of patching it up.

Moral of the story is, make sure you tell them ALL of your symptoms, not just the ones you arent embarrassed by(because it DOES make a difference how they treat this), and set your hardass head to do what they fuggin tell you to.
They arent ALL *pretty boyes.
SOME of them actually went to school for this chit, and have done it before...

lol i let them know what im going through i was hoping today was the day
now id like to be able to work the outage or atleast some of it first
but we will see what they say thursday when i go there
kinda hard to not tell them what is going on when ive done so many tests and xrays and its all laid out in front of them before i get there
ive done 4 sets of blood work in the last month and a half
that doesnt even count the one today they wanted arterial blood from left wrist to check oxygen levels

 

[dall]

Hes being a dik as usual.
It'll be fine.
Its not a Creamsickle, and therefore isn't as SENSITIVE to VARIABLES.

he needs the grease there so the salt water doesnt hurt the bearings

 

[Dream]

Thanks, but no worries. I'll check and see if I can find a plan online.
Seeing yours just made me think how my wife would like that.
Our anniversary is coming up and I've got no fuggin ideas anyway..

Bossladys Birfday is coming up in May, then our anniversary in June.
I have no decent ideas for EITHER of those events.
I believe she has finally started to realize that I never will.
I do remember to tell her happy dirfdaze and anniversaries ...n stuffs tho.
Truth is that she is WAY better than anything I could do for her, and I'm damn blessed to have someone that takes care of me like she does.
I should be less of a dik really...

 

[Dream]

lol i let them know what im going through i was hoping today was the day
now id like to be able to work the outage or atleast some of it first
but we will see what they say thursday when i go there
kinda hard to not tell them what is going on when ive done so many tests and xrays and its all laid out in front of them before i get there
ive done 4 sets of blood work in the last month and a half
that doesnt even count the one today they wanted arterial blood from left wrist to check oxygen levels

Ouch.
We're they able to get the arterial sample? Thats a bish. They have to go DEEP for that one.
Not saying you arent used to that...

All the tests and bullchit can tell them a lot, but make sure you add in any wierd chit that you feel etc.
Sometimes it does make a difference.

 

[Gullet]

Ouch.
We're they able to get the arterial sample? Thats a bish. They have to go DEEP for that one.
Not saying you arent used to that...

All the tests and bullchit can tell them a lot, but make sure you add in any wierd chit that you feel etc.
Sometimes it does make a difference.

I offered to do it for him here...
I have wire coat hangers, denatured alcohol & a Dremel.
Just trying to save him some money.

 

[Mastermind]

he needs the grease there so the salt water doesnt hurt the bearings

Yep.....Dallas is ok.

 

[dall]

Bossladys Birfday is coming up in May, then our anniversary in June.
I have no decent ideas for EITHER of those events.
I believe she has finally started to realize that I never will.
I do remember to tell her happy dirfdaze and anniversaries ...n stuffs tho.
Truth is that she is WAY better than anything I could do for her, and I'm damn blessed to have someone that takes care of me like she does.
I should be less of a dik really...

You just like telling her she is old
And
That mistake she made years ago still remembers

Ouch.
We're they able to get the arterial sample? Thats a bish. They have to go DEEP for that one.
Not saying you arent used to that...

All the tests and bullchit can tell them a lot, but make sure you add in any wierd chit that you feel etc.
Sometimes it does make a difference.

 

[Dream]

I offered to do it for him here...
I have wire coat hangers, denatured alcohol & a Dremel.
Just trying to save him some money.

All you need really.

 

[dall]

Ouch.
We're they able to get the arterial sample? Thats a bish. They have to go DEEP for that one.
Not saying you arent used to that...

All the tests and bullchit can tell them a lot, but make sure you add in any wierd chit that you feel etc.
Sometimes it does make a difference.

but they got both of them today lol

 

[Dream]

You just like telling her she is old
And
That mistake she made years ago still remembers

Matter of fact, she IS older than me.
Wouldnt know by looking though.
I look like a bucket of chit compared to her.
And she DEFINITELY fukked up marrying my arse...
She's amazing in every way except her taste in men.

 

[dall]

Matter of fact, she IS older than me.
Wouldnt know by looking though.
I look like a bucket of chit compared to her.
And she DEFINITELY fukked up marrying my arse...
She's amazing in every way except her taste in men.
View attachment 368434

lol im not dead yet