Not So Pro 3

[Czed]

Good evening/night guys
Fun day
After work I was able to rampage
Home
Multiple vehicle's cleaned the ditches out on the way home.
It had melted just enough on the paved roads to get traction
To get up my solid ice covered road.
Made ribs with carolina mustard sauce again
Then the icestorm started
Power's out.
I wish I'd have recorded the tree's snapping from the ice
Sounds like rifle shots.

 

[dall]

I’m not that young lol I did a lot of drugs in my rocker days too lol

no *s-word

 

[Dream]

Depends on your end goal and do you have a stand alone system on the motor?
700 goes none electronic, half way and all electronic.
What one are you referring to?

DA old one with the lockup cable that broke sometimes.
I want a flathead with a magneto and a 2 speed powerglide. Dont even need a battery. Just hand crank it if the battery goes dead.
Not great for performance, but you'll get there, eventually.

 

[Slumberjack]

Good evening/night guysView attachment 283089
Fun dayView attachment 283090
After work I was able to rampage
Home
Multiple vehicle's cleaned the ditches out on the way home.
It had melted just enough on the paved roads to get traction
To get up my solid ice covered road.View attachment 283091
Made ribs with carolina mustard sauce again
Then the icestorm started
Power's out.
I wish I'd have recorded the tree's snapping from the ice
Sounds like rifle shots.

That looks like someone a Cajun would enjoy!

 

[Slumberjack]

no *s-word

Oh it shows I know I can’t hide it lol

 

[huskihl]

Gawdamnhuskies

 

[Stump Shot]

Gawdamnhuskies

H8er

 

[Lightning Performance]

@Czed
That *s-word is loud when they break!
Stay low and under something solid this week and move fast or not at all. You got it bad there man.

 

[dall]

Gawdamnhuskies

Lol exactly

how’s you slacker

H8er

lol boat owner

how’s you slacker

 

[Lightning Performance]

See ya kids
Going back to my prodjects and stuffs plus the stove looks hungry.

 

[Dream]

Gawdamnhuskies

Hard day at the office?

 

[Slumberjack]

Gawdamnhuskies

I got some messed up 272 cases I may throw in a fire lol

 

[huskihl]

H8er

Hard day at the office?

257 converted to a ported 262. New OEM intake block and gaskets. Converted an HDA199 with the 257 shafts. New correct carb kit. No matter what I did to it, I couldn’t get fuel to the low side. No passageways blocked that I can see. But I could not for the life of me find any low side fuel going to the needle. So I drilled out a hole that had a brass plug in it right down into the low feed screw. Boom. Runs perfect

 

[huskihl]

how’s you slacker

Better now.
The new tractor hauler looks nice

 

[Dream]

257 converted to a ported 262. New OEM intake block and gaskets. Converted an HDA199 with the 257 shafts. New correct carb kit. No matter what I did to it, I couldn’t get fuel to the low side. No passageways blocked that I can see. But I could not for the life of me find any low side fuel going to the needle. So I drilled out a hole that had a brass plug in it right down into the low feed screw. Boom. Runs perfect

Well thats a relief.
I thought you might have been touched inapropriately by a Swedish man...

 

[huskihl]

Well thats a relief.
I thought you might have been touched inapropriately by a Swedish man...

Not yet. Well, without permission at least

 

[Slumberjack]

257 converted to a ported 262. New OEM intake block and gaskets. Converted an HDA199 with the 257 shafts. New correct carb kit. No matter what I did to it, I couldn’t get fuel to the low side. No passageways blocked that I can see. But I could not for the life of me find any low side fuel going to the needle. So I drilled out a hole that had a brass plug in it right down into the low feed screw. Boom. Runs perfect

I have a 199 in my spare parts I’m going to have to take apart to see what you’re talking about.

 

[huskihl]

I have a 199 in my spare parts I’m going to have to take apart to see what you’re talking about.

The one I used was actually a 191, which is the same thing but without the black spacer on bottom

 

[Slumberjack]

The one I used was actually a 191, which is the same thing but without the black spacer on bottom

Was hoping I could fit a 199 to a 261 and port it. Sounds like I may be up for some *f-wordery!

 

[huskihl]

Was hoping I could fit a 199 to a 261 and port it. Sounds like I may be up for some *f-wordery!

It’s the same carb body, but the linkages are different. Have to swap the 261 shafts into the 199