Not So Pro 3

[Woodrow]

Oh, and good morning fellas. On the way home yesterday I saw 2 things worth noting and both were near each other: a motorhome pulling a pickup on a dolly and the pickup was on fire in the engine bay. That was exciting - smoke across all lanes of traffic and the people were of course frantic. It had just materialized and no fire dept around yet… Also saw the world famous Reynolds Crane compound, but I couldn’t see @Woodrow waving from the interstate, on a Sunday. What a slacker.

Thanks for the shout out @Loony661 Andy. I don't spend much time at the shop these days. I have my hands full looking at jobs and quoting. If it was on Sunday I was at the camper or on my way home. Lol

 

[Kiwioilboiler]

Morena E Hoas.

 

[Loony661]

Thanks for the shout out @Loony661 Andy. I don't spend much time at the shop these days. I have my hands full looking at jobs and quoting. If it was on Sunday I was at the camper or on my way home. Lol

I wouldn’t expect anything less.

 

[whybother]

@3browns, I drilled the spot welds and removed the inner baffle completely, then opened up the outlet as much as possible keeping the stock deflector operational.
Eventually I'll add another port somewhere but that was a noticeable improvement.

 

[3browns]

@3browns, I drilled the spot welds and removed the inner baffle completely, then opened up the outlet as much as possible keeping the stock deflector operational.
Eventually I'll add another port somewhere but that was a noticeable improvement.

@whybother

Thanks for the info

Is there a gasket to worry about?

If so, I better have one on hand because it's guaranteed it will split

 

[3browns]

@whybother

Thanks for the info

Is there a gasket to worry about?

If so, I better have one on hand because it's guaranteed it will split

Nevermind, I found a parts breakdown and I will stop at the ACE store and see if they have the gasket before I tear into this thing

Thanks again

 

[whybother]

Nevermind, I found a parts breakdown and I will stop at the ACE store and see if they have the gasket before I tear into this thing

Thanks again

I was able to reuse my gasket. I did have one here just in case, that's probably why it didn't split.

 

[3browns]

I was able to reuse my gasket. I did have one here just in case, that's probably why it didn't split.

That’s essentially a universal law

 

[full chizel]

Here it is fellas. I’m still at a loss of words

https://www.dignitymemorial.com/obituaries/rochester-mi/brad-reckling-11874347

 

[Stump Shot]

Warm today after a frog strangler of a storm last night. Washed out the drive a bit, otherwise a friend dropped off a couple ice cream pails of strawberries that had to go from the storms, so it ain't all bad. Cooking them down now.

 

[Mastermind]

STRONG!!!

Speaking of milling saws, my son left his MS660 here after the last milling session and I had been nagging him to open up the muffler...

Hmmmmmmm

Any MS660 muffler mod tips out there?

@3browns, I drilled the spot welds and removed the inner baffle completely, then opened up the outlet as much as possible keeping the stock deflector operational.
Eventually I'll add another port somewhere but that was a noticeable improvement.

This.

@whybother

Thanks for the info

Is there a gasket to worry about?

If so, I better have one on hand because it's guaranteed it will split

Metal gasket. Reuse.

 

[Mastermind]

Here it is fellas. I’m still at a loss of words

https://www.dignitymemorial.com/obituaries/rochester-mi/brad-reckling-11874347

I'm sorry Chris.

 

[John Wargo]

In the morning we are going to Pigeon Forge for a few days.....

Stop by the old mill and the smoky mountain knife works. Knife store is north of pigeon forge in Sevierville.

 

[John Wargo]

I'm sorry Chris.

Way too young

 

[John Wargo]

Have to give a 30 minute presentation Friday morning on lock out/ tag out procedures. Teacher asked If i would be ok. I told him starting is no problem. Getting me to shut up may be the issue.

 

[Stump Shot]

Here it is fellas. I’m still at a loss of words

https://www.dignitymemorial.com/obituaries/rochester-mi/brad-reckling-11874347

Condolences.

 

[Lnk]

Here it is fellas. I’m still at a loss of words

https://www.dignitymemorial.com/obituaries/rochester-mi/brad-reckling-11874347

Sorry Chris, that ain't right.

 

[timg]

Here it is fellas. I’m still at a loss of words

https://www.dignitymemorial.com/obituaries/rochester-mi/brad-reckling-11874347

Too young plus a family, thoughts and prayers for all.

 

[nbbt]

Warm today after a frog strangler of a storm last night. Washed out the drive a bit, otherwise a friend dropped off a couple ice cream pails of strawberries that had to go from the storms, so it ain't all bad. Cooking them down now.

Berries time of the season.
Red and black raspberries very soon and the start of these delicious numbers today. Very tasty indeed.

 

[full chizel]

Thanks guys


Want to know what else isn’t right Larry? The MFers haven’t even been charged yet!!!

He was in an unmarked car so that means no dashcam footage.

3 men held in Oakland County Detective Reckling's murder could soon be released​

3 men held in Oakland County Detective Reckling's murder could soon be released

Detroit police believe they have recovered the gun used to kill an Oakland County Sheriff’s Office detective. That's according to a source close to the case.

www.wxyz.com