NOS saw parts

[Daserlon]

I dont know if i should post this here or classifieds because i'm looking for help but will be selling.
I bought a pile of old saws and parts. There's 2-3 mid sized boxes of enveploes with NOS parts. Problem is i dont know what they fit. Some envelopes have part numbers but it'll take forever to google every one. Figured i'd just start posting pics and see if anybody recognizes them.
They'll be for sale. I think there's stihl, j-red, pioneer, some remmington.
I'll start with some gaskets and some hoses

 

[T.Roller]

I dont know if i should post this here or classifieds because i'm looking for help but will be selling.
I bought a pile of old saws and parts. There's 2-3 mid sized boxes of enveploes with NOS parts. Problem is i dont know what they fit. Some envelopes have part numbers but it'll take forever to google every one. Figured i'd just start posting pics and see if anybody recognizes them.
They'll be for sale. I think there's stihl, j-red, pioneer, some remmington.
I'll start with some gaskets and some hosesView attachment 79671 View attachment 79672 View attachment 79673 View attachment 79675 View attachment 79677

I may be interested if you figure out what they are

 

[Daserlon]

This set of gaskets are perferated but still together
some more gaskets
thats it for now. I dont know what any of this stuff is worth so open to offers. Thanks

 

[JonCraig]

This set of gaskets are perferated but still together
View attachment 79679

I'd almost guarantee that one is from an older, "muffler on the side, spark plug under the trigger" saw. I know I've worked on some that had a gasket like that. You leave it as is (don't tear at the perforations). The bottom is cylinder gasket and the top is reed valve. I don't think it was a 245a. Think it was either my Homie SXL 925 or old craftsman roper. The square hole definitely says reed cage. Not saying it would fit a 925 or roper, but that's the era you're looking at for that one anyway.

Not too much help, I know.

 

[Daserlon]

I'd almost guarantee that one is from an older, "muffler on the side, spark plug under the trigger" saw. I know I've worked on some that had a gasket like that. You leave it as is (don't tear at the perforations). The bottom is cylinder gasket and the top is reed valve. I don't think it was a 245a. Think it was either my Homie SXL 925 or old craftsman roper. The square hole definitely says reed cage. Not saying it would fit a 925 or roper, but that's the era you're looking at for that one anyway.

Not too much help, I know.

Any help is good help, thanks. I've got half dozen of all those gaskets.

 

[Daserlon]

I may be interested if you figure out what they are

Sounds good. I hope i/we can get a bunch of this stuff figured out. It's gunna take a while.

 

[T.Roller]

Sounds good. I hope i/we can get a bunch of this stuff figured out. It's gunna take a while.View attachment 79848

Holy *s-word

 

[Onan18]

Those gaskets look suspiciously Homelite to me, XL-12/SXL-12 maybe?