Cerberus
Cerberus the aardvark, not the hell-hound!!
- Local time
- 9:11 PM
- User ID
- 11523
- Joined
- Jan 20, 2020
- Messages
- 292
- Reaction score
- 120
- Location
- Florida (tampa area)
I cannot even imagine a price, neither of the units work....
I replaced fuel lines & fuel filter and plug on the one I intended to finish:
1977 Poulan 25d
However I never got it to start, am confident it's just the carb, I'd back-burner'd it and a client gave me a non-running:
early 80's, low-30cc's Poulan of similar type,
so I figured I could probably frankensaw them but before I ever even began i fell into another project that is going to keep me busy for the foreseeable future lol so I need to re-home my vintage poulan(s) here!!
I can port/grind well...but don't know what this type of engine wants, so I can offer to do work on it BUT only if you know specfifically what you want done. Same for B&C, they're just powerheads but if you need a B&C for it I have plenty between 10" and 18" so let me know
Thanks for looking, am hoping there's someone w/ interest in this platform, would hate this to just be trash :/
I replaced fuel lines & fuel filter and plug on the one I intended to finish:
1977 Poulan 25d
However I never got it to start, am confident it's just the carb, I'd back-burner'd it and a client gave me a non-running:
early 80's, low-30cc's Poulan of similar type,
so I figured I could probably frankensaw them but before I ever even began i fell into another project that is going to keep me busy for the foreseeable future lol so I need to re-home my vintage poulan(s) here!!
I can port/grind well...but don't know what this type of engine wants, so I can offer to do work on it BUT only if you know specfifically what you want done. Same for B&C, they're just powerheads but if you need a B&C for it I have plenty between 10" and 18" so let me know
Thanks for looking, am hoping there's someone w/ interest in this platform, would hate this to just be trash :/
