- Local time
- 4:25 AM
- User ID
- 26310
- Joined
- Mar 13, 2023
- Messages
- 1,027
- Reaction score
- 2,844
- Location
- Maryland, USA
It be cool to show everyone what they look like inside. I wish I could just find the one I had already molested. 
Ms 201 m-tronic stalling issue
- Thread starter NateSaw
- Start date
- Local time
- 4:25 AM
- User ID
- 26310
- Joined
- Mar 13, 2023
- Messages
- 1,027
- Reaction score
- 2,844
- Location
- Maryland, USA
OK. New novice realization. Most of you were probably already shaking your head cause I don't know what the fugg I'm Talkin bout.... The climbers 201...webt back in to flow the lowers and raise the uppers,and most importantly install the green solenoid. I took off a white, pintoe style... The green ones are of the spiraled plate design... I had it all mixed up, likely from memory of the 362 old vs new, more likely due to premature senility... 
Anyway, this saw rips... And it idles perfectly. @Mastermind, thanks for the reset procedure, it definitely needed it, and definitely took longer than I thought to smooth out and scream. Odd thing.... I stayed at wot after it smoothed out, and it went back for a second cycle. Things rips!
Anyway, this saw rips... And it idles perfectly. @Mastermind, thanks for the reset procedure, it definitely needed it, and definitely took longer than I thought to smooth out and scream. Odd thing.... I stayed at wot after it smoothed out, and it went back for a second cycle. Things rips!
