Looking For the Name of Green Grease

[hotajax]

I was looking at another forum where the poster said he buys bearings that are shielded on both sides, removes one of the shields, and stuffs green grease into the bearing before sealing it up again. What is the is green grease he is referring to? The application for the bearings is for the front wheels on a Wheel Horse / Toro tractor. Thanks in advance.

 

[redneckhillbilly]

any greese would probably work, i think lucas offers a grease thats green.

 

[hotajax]

Thanks bud. Much appreciated. Now that you mention it, I remember a grease cartridge from Lucas and some blather about green. Thanks again.

 

[SimonHS]

He may have been referring to this:

Green Grease

Green Grease

greengrease.com

Other manufacturers make similar lithium based, waterproof, high performance, green-coloured greases:

X-TRA Heavy Duty Grease – Lucas Oil Products, Inc. – Keep That Engine Alive!

www.lucasoil.com

Fuchs Renolit LX-PEP 2 Complex Green Grease 400g | LRT Lubricants Shop

Fuchs Renolit LX-PEP 2 Green Grease Fuchs Renolit lx-pep 2 green grease is one of the highest spec multipurpose Lithium Complex EP greases available on the market, with a wide temperature range of -30 to +150°c and constant lubrication applicable until +200°c. It is green in colour which means...

www.lrtlubricants.co.uk

BOLL Bearing Grease

High-performance bearing grease intended for rolling and sliding bearings operating under heavy loads, including impact loads. Suitable for use in low-speed gear units, joints, and guides, ensuring durability and reliability under harsh conditions. It ...

www.boll.pl

 

[GMB74]

I would be concerned with the possibility of the grease not spinning out of the bearing quickly enough and blocking the oil from the fuel mix getting to the bearing. I clean out all the grease and relube the bearing with the same oil you mix with the gas. The bearing is (over)lubricated and ready for startup, and everything is compatible.
If the engine is going to sit for an extended period of time before startup, the grease makes more sense.
Maybe I am just overthinking the situation.

 

[SawAddictedFarmer]

I would be concerned with the possibility of the grease not spinning out of the bearing quickly enough and blocking the oil from the fuel mix getting to the bearing. I clean out all the grease and relube the bearing with the same oil you mix with the gas. The bearing is (over)lubricated and ready for startup, and everything is compatible.
If the engine is going to sit for an extended period of time before startup, the grease makes more sense.
Maybe I am just overthinking the situation.

This is for lawn mower wheel bearings

 

[LS50713]

I was looking at another forum where the poster said he buys bearings that are shielded on both sides, removes one of the shields, and stuffs green grease into the bearing before sealing it up again. What is the is green grease he is referring to? The application for the bearings is for the front wheels on a Wheel Horse / Toro tractor. Thanks in advance.

Lucas Red & Tacky on everything except boat trailer wheel bearings has been a winner for me.

 

[7-pin]

"Polyurea" maybe?

 

[Coupe]

Be able to use it for St Patrick's Day

 

[edritchey]

"Polyurea" maybe?

View attachment 486477

I buy this stuff it’s a good all around grease to have in the shop.