Husqvarna 560XPG wont idle

[Cameroo24]

Hello, I bought a cheap huskie 560xpg from a mate as it had stopped working, I have put an OEM carb kit into it along with several other parts which were broken (fuel lines, returns etc) and a fuel filter oh and i plugged the decomp as it was leaking. It now starts and runs, but won't idle. The throttle also has a wierd feeling, the trigger itself feels fine however it almost seems like something in the carb is "sticking" as it seems to hold the throttle open for a second or so after I release the trigger. Does anybody have any ideas? I'm suspecting potential autotune issues so I may have to take it to my local shop...
Thank you very much everybody.

 

[Coupe]

Sounds a bit like you may not have the throttle rod quite right cause I have found huskies
can be a bit of a hand full in that department. Could be one of your fuel lines is jamming
it or some model huskies the kill switch can cause a head ache as well. I think that model
may when you pull the choke out and start keep a few revs on till you blip the trgger.