Husqvarna 254XP Rebuild

[ZukiRyder440]

Oil pump was in good shape. Cleaned it off after I took the pic.

 

[ZukiRyder440]

PTO side seal in place. Had a slight mishap with one but luckily I had a spare. Back in business.

 

[ZukiRyder440]

Worm gear on crank, oil pump installed, “washer” installed as well.

 

[ZukiRyder440]

Timing advance. Approx. 1/4 of the key which is about .025”

 

[ZukiRyder440]

The kill wire was kinda melted through. I’ll run it. Fan shroud installed.

 

[ZukiRyder440]

Starter installed, other smalls installed as well.

 

[ZukiRyder440]

Welp, we actually got the wrong ring from the dealer. Part number was correct, just made a miskake. So, I ended up using the ring that came with it. Im freakin crazy I know, but, I added an extra dollup of oil to the gas for more lubrimication.
I started it up, the clutch decide to take a little ride. I put the saw down and I chased the darn thing around like an idiot. Gonna need a new clutch drum bearing now.

 

[ZukiRyder440]

Anyways, here she is... Im really happy with it!

 

[ZukiRyder440]

 

[ZukiRyder440]

Ill get her into some wood soon

 

[Stump Shot]

PTO side seal in place. Had a slight mishap with one but luckily I had a spare. Back in business. View attachment 277757

Looking good there, hope you have a chain catcher for that bad boy.

 

[XP_Slinger]

Good job bub

 

[ZukiRyder440]

Looking good there, hope you have a chain catcher for that bad boy.

Thank you. I will be ordering that very soon thanks for the reminder.

 

[Ronie]

That thing sounds mean!

 

[ZukiRyder440]

Good job bub

Tanks dad

 

[ZukiRyder440]

That thing sounds mean!

Thanks Ronie!

 

[XP_Slinger]

View attachment 277761 View attachment 277762 The kill wire was kinda melted through. I’ll run it. Fan shroud installed.

Shrink wrap will cover that nicely bub. Or, you could make a new kill wire, I have lots of connectors that will work perfectly.

 

[ZukiRyder440]

Shrink wrap will cover that nicely bub. Or, you could make a new kill wire, I have lots of connectors that will work perfectly.

I think I might shrink wrap it for now.

 

[ZukiRyder440]

Once that wire goes I will make a new kill wire.

 

[Stump Shot]

Shrink wrap will cover that nicely bub. Or, you could make a new kill wire, I have lots of connectors that will work perfectly.

That electrical dip coating stuff in a can is pretty handy for such things too. Prolly about a $7 wire there.