PaladinMan187
Active OPE Member
- Local time
- 1:40 AM
- User ID
- 2033
- Joined
- Oct 25, 2016
- Messages
- 18
- Reaction score
- 21
- Location
- Frederick, MD
So several years ago my buddy gassed his 046 twice. Once was when he loaned it out and another time was when he got careless when mixing fuel. The saw got a big bore kit the first time and ran decent but never quite right so I figured it would need more work later. Now its still sitting in pieces after I just handed him my 361 several years ago to get him going with a good saw. Since its been gassed twice and got hotter than hell the 2nd time, I don't trust the seals and think the bearings might need replaced. Should I just set it on the shelf and leave it a conversation piece or should I start testing and ordering parts? What would you guys do with it?
Note, it was purchased off ebay about 10 years ago and received a Dual port aftermarket muffler and big bore kit from Baileys when it was roached the first time.
Note, it was purchased off ebay about 10 years ago and received a Dual port aftermarket muffler and big bore kit from Baileys when it was roached the first time.