ECHO Echo, Echo, Echo

[ajschainsaws]

Thanks for the help I can get the Sugihara and GB’s no problem
I’ve seen it somewhere where another bar mount had been used

 

[FergusonTO35]

Do they sell those in the UK, or did it sneak in from somewhere else?

 

[ajschainsaws]

It came from down under

 

[ajschainsaws]

Do they sell those in the UK, or did it sneak in from somewhere else?

Nah our emissions and elf and safely brigade would have a fit to
See this beast for sale

 

[pavel408]

Echo CS-621SX released: https://www.echotools.com/en_us/news/echo-launch-cs-621sx https://www.echotools.com/en_us/products/chain-saws/chain-saw/cs-621sx_38

Obviously it should replace CS-620SX, the main difference being less emissions Other than that a bit less power (3.32 - 3.24 kW), a bit more weight (6.2 - 6.3 kg), less noise, more vibrations and new oil/fuel caps.

Anyone got Parts Catalogue? Maybe the only difference is just cat muffler and carb?

 

[MACHINE]

Still runs well

Sent from my SM-G955U using Tapatalk

 

[sawfun]

That comes from from my neck of the woods according to the service label

Still runs well

Sent from my SM-G955U using Tapatalk

 

[MACHINE]

That comes from from my neck of the woods according to the service label

It ended up in SE Oklahoma now

Sent from my SM-G955U using Tapatalk

 

[av8or3]

Got this new addition and was wondering what bar Mount was the closest
For a long bar needed for this Saw

View attachment 210209 View attachment 210210

Here’s some pics of the bar Tsumura made for the saw. This bar came with my CS-1201.

 

[ajschainsaws]

View attachment 219311 View attachment 219312
Here’s some pics of the bar Tsumura made for the saw. This bar came with my CS-1201.

Thanks for that information I will make use of it in finding a nice long bar

 

[Piston Skirt]

Echo CS-621SX released: https://www.echotools.com/en_us/news/echo-launch-cs-621sx https://www.echotools.com/en_us/products/chain-saws/chain-saw/cs-621sx_38

Obviously it should replace CS-620SX, the main difference being less emissions Other than that a bit less power (3.32 - 3.24 kW), a bit more weight (6.2 - 6.3 kg), less noise, more vibrations and new oil/fuel caps.

Anyone got Parts Catalogue? Maybe the only difference is just cat muffler and carb?

No cat. Few durability updates different porting and subsequently lower actual noise in usage.

 

[Skisawyer]

No cat. Few durability updates different porting and subsequently lower actual noise in usage.

Will this saw come to the US of A?

 

[Piston Skirt]

Will this saw come to the US of A?

US are already getting some of the minor updates (as renewed fuel/oil caps) on 620P.
So, it should be so.

 

[Hoggwood]

Pulled down a 1001 today. Dad's old one. It has been sitting for a few years. Blew through a couple rounds for kicks. I need to break it down again to pull the manual/auto pumps. Checks are likely stuck a bit as it seems to be pulling air a tad. Time for new O-rings on the pumps and fuel pipe/tank adapter.

 

[MACHINE]

Vintage echo CS750EVL
Stout saw

https://www.facebook.com/video.php?v=3414577001950945

Sent from my SM-G955U using Tapatalk

 

[TX_Welder]

Vintage echo CS750EVL
Stout saw

https://www.facebook.com/video.php?v=3414577001950945

Sent from my SM-G955U using Tapatalk

Doesn't look quite as good as yours but it's still gettin it. It's on its second life now, a relative straight gassed it about twenty years ago. Just recently resurrected it. Found a good used cylinder for it on ebay and it has a red barn piston in it. Pulls a 30" pretty good.

 

[FergusonTO35]

Gave the newish 303T a little exercise on some walnut limbs that were hanging.

 

[old 040]

After sitting nearly five years cleaned and ready for reassembly, (I was waiting on a piston assy at the time was NLA, even after getting a piston once it was made, it sat for another year and a half), and with taking a three week break from work with the Covid thing going on, I finally got around to getting this 4500 back together and ready for action, almost forgot how great these little saws run, it made me take out my 4600 later the same day and do some cutting, really is a nice size saw for throwing on the wheeler and bringing home some smaller rounds......

 

[ayoungtexan]

Not a chainsaw, but my muffler modded Echo 2620 trimmer.

 

[Gizzard]

Not a chainsaw, but my muffler modded Echo 2620 trimmer.View attachment 236172

How many cutting seasons/years you have on the 2620? You satisfied on performance or think the muffler mod was needed to get what it could do?