Do you have C.A.D.

[Yukon Stihl]

I only have two...
the first one i bought,and the last one i bought.
Seriously though i have a dedicated semi trailer for saws now,and if i put them all in there it would be a hoard.But i keep telling myself I'm saving them from a horrible death.

 

[drf256]

I have about 30+ saws. I have 10-20 extra jugs, 20-30 extra Pistons, and many parts for saws that I don't own but "may" someday.

I cut maybe 4 cords a year, if I'm lucky. My business has nothing to do with trees or wood. I partially heat with wood, but don't need to.

I fix and clean some saws up so nice, that I change my mind about selling them.

I don't see any problem with it.

 

[abikerboy]

My cad problem is now I seem to be acquiring 2 of everything!

 

[Onan18]

My cad problem is now I seem to be acquiring 2 of everything!

Spares, everyone needs spares to run in case one is down for repair or "breathing treatment."

Joe

 

[Brewz]

Ok...... who voted " I only have 1 saw"?????

 

[Brewz]

I have started rebuilding old broken saws to turn them over for a bit of money.
I find my self thinking the following about almost every one that I have to fix

"Gee, one of them would be handy"

Do you have C.A.D when you look at an 090 and think it would be handy to have around?

 

[mdavlee]

I have more than enough capable firewood saws. Over that part of Cad, now my new obsession is 2-piece race saws. Have the 3 and 5 cube covered, but have a bunch on cube's left to fill the Ice tray. If ported saws are a fad, then what are race saws??

372 your 5 cube?

 

[Tundra]

372 is my 5 cube

 

[Mattyo]

Said this before, will say it again. If you bring 1 saw to the woods, get all set to go, pull until you are tired... it won't start. Next time you get smart, bring 2 saws into the woods. First saw gets the bar stuck, 2nd saw won't start. Hard and fast rule... bring 3 saws into the woods, minimum.

who's with me?

 

[mdavlee]

372 is my 5 cube

I figured. They're hard to beat.

 

[jake wells]

i have LBAD not CAD

 

[junkman]

Said this before, will say it again. If you bring 1 saw to the woods, get all set to go, pull until you are tired... it won't start. Next time you get smart, bring 2 saws into the woods. First saw gets the bar stuck, 2nd saw won't start. Hard and fast rule... bring 3 saws into the woods, minimum.

who's with me?

Or bring 1 stihl and cut wood all day with the same saw

 

[drf256]

Or bring 1 stihl and cut wood all day with the same saw

Wish I could double like this post.

But you'll suffer from PWD (plastic withdrawal disorder).

 

[Mattyo]

I know I know, stihls have pullcords that never break, and seals made of kryptonite.... never have fuel or air filters clog, never pinch bars, etc etc....they are immune to maintenance issues... i getcha

 

[Mattyo]

oh, and since they are so awesome, no need to bring a scrench into the woods either!

 

[mdavlee]

For the last 2 years my main saw was the 046 when it wasn't robbed of parts. Never let me down like several huskies sadly. Only problem with the 088 was the oiler leaking a little. My 266 has been good what little I bring it out and use it. My 365/372s stay apart more than together trying stuff and porting top ends for others.

I think I sold 4 or 5 parts saws this past 3 weeks. Bought a 3120 during that time though. In weight they evened out

 

[Frogfarmer]

Yes I have CAD. I also have three homes one of which is a farm. I keep an 026 and 044 at the main house. I keep an 028 at the secondary house. The farm has the rest. Considering the different locations I have a need for 10 runners. So I've only got 5-6 extras. Should I count the new inventory at the shop. Maybe it's worst than I think. Ill take any Pro Saw someone will send me. I have it and like it.

 

[Wilhelm]

My saws in order of purchase:
- late 80's - Sachs-Dolmar 285 - electric, damaged housing/R.I.P.
- late 80's - Sachs-Dolmar 105
- 2006. - Dolmar PS-6400
- 2014. - Dolmar PS-7900
- 2015. - Sachs-Dolmar 108

The Sachs-Dolmar 285 is "dead", but I still have her.
The Sachs-Dolmar 105 is partially dismantled but should run fine once put back together.
The Dolmar PS-6400, Dolmar PS-7900 and Sachs-Dolmar 108 are runners.

I waited too long to react on a great PS-7310 deal and I passed up on a decent PS-7910 deal.
I also only look at Dolmar's, other brands do not wake any interest in me for whatever reason.

That been said I guess I am not chronically C.A.D. infected, but I do have more saws than I need and crave to use them.

 

[junkman]

oh, and since they are so awesome, no need to bring a scrench into the woods either!

Oh they are so awesome they come with scrench holders from the factory so you do not have to look all over for one

Ok i will let it go now ,lol

Back to the Cad problems

 

[merc_man]

Like the scrench holder. Where ya find that l?