HELP! Do I need a new crank? (Husky 350)

[Huskyvarnya Saws]

I was tearing down a husky 350 that I rebuilt a few years back, and I noticed that the bearings were nearly falling off the crank. I can remove and reinstall them back on the crank with my thumb and index finger with no effort. Is this normal for this particular saw, or should I be looking into a new crank? I purchased some new SKF bearings, and they have a similar fitment. Any advice is appreciated. Thanks!

 

[cuinrearview]

The main bearings on the 345s and 350s I've done were not an interference fit to the crank. I would consider what you are seeing normal for that model.

 

[huskihl]

The main bearings on the 345s and 350s I've done were not an interference fit to the crank. I would consider what you are seeing normal for that model.

Same

 

[Agrarian]

Same