Dallas Fundraiser

[hacskaroly]

Yep, #5 was a hard pass.

I would have taken it in a heartbeat!!

 

[Powerstroke Cowboy]

Yep, #5 was a hard pass.

I would have taken it in a heartbeat!!

I did, and feel a little bad for speaking for it.

 

[hacskaroly]

I did, and feel a little bad for speaking for it.

Enjoy it, have fun putting that puzzle back together!!

I have plenty of project saws to keep me busy for a while... a long while...lol. Some how they keep showing up!

 

[Woodwackr]

I have plenty of project saws to keep me busy for a while... a long while...lol. Some how they keep showing up!

Isn’t this a requirement for membership here?

 

[LAWN BOY]

Enjoy it, have fun putting that puzzle back together!!

I have plenty of project saws to keep me busy for a while... a long while...lol. Some how they keep showing up!

I’m in the same situation. I really need to catch up fixing some saws but just keep buying/receiving/trading more projects.

 

[hacskaroly]

Isn’t this a requirement for membership here?

Yes, I believe you are correct, I think it is in the small print somewhere!!

 

[stihl livin]

I’m in the same situation. I really need to catch up fixing some saws but just keep buying/receiving/trading more projects.

Some day you will figure it out. Until then you are great for a laugh.

 

[Mastermind]

I did, and feel a little bad for speaking for it.

I've ported a few of em. They turn up real good.

 

[Scotty Overkill]

Where's da prize list fellers?

 

[ammoaddict]

Where's da prize list fellers?

Post in thread 'Dallas Fundraiser' https://opeforum.com/threads/dallas-fundraiser.31252/post-1615527

 

[Scotty Overkill]

I'll do #19 fellas......I can use a couple loops...

Thanks to all who donated. I hope ur doing well @dall, love ya brother!

 

[Powerstroke Cowboy]

I've ported a few of em. They turn up real good.

Oh, there's a zero percent chance it remains stock...

 

[Duane(Pa)]

@davidwyby you’re up

 

[Mastermind]

Oh, there's a zero percent chance it remains stock...

There's a thick insulator gasket under the base of the jug. Try to keep it.

 

[Powerstroke Cowboy]

There's a thick insulator gasket under the base of the jug. Try to keep it.

Thank you. I appreciate the tip.

 

[Woodrow]

@Scotty Overkill - #19

@davidwyby you sir are on the clock

@GCJenks204 you are on deck sir

 

[Woodrow]

Raffle Item List

1. Stihl 044 - Donated by @redline4
2. Woods Port Job - Donated by @Mastermind
3. Stihl Lightweight Bar - Donated by @GCJenks204
4. Woods Port Job - Donated by @Canadian farm boy
5. Jonsered 2094 Bucket O Saw - Last number drawn or anybody drawn can choose - Donated by @Lnk
6. Husqvarna X-Cut Chain 3/8 .050 72dl - Donated by @Jscb1b
7. Husqvarna X-Cut Chain 3/8 .050 84dl - Donated by @Jscb1b
8. Husqvarna X-Cut Chain 3/8 .063 115dl Square Grind - Donated by @Jscb1b
9. 2 - Husqvarna X-Cut Chain 3/8 .050 84dl - Donated by @bradb123
10. Jonsered 2152 with a new bar and chain - Donated by @stihl livin
11. 100 rounds of .38 ammo - Donated by @Redfin
12. Husqvarna 395 set of new oem cases and recoil - Donated by @Woodwackr
13. KA-BAR Becker bk40 knife - Donated by @Czed
14. Woods Port Job - Donated by @BuxtonSaws
15. Stihl 12mm 044 Arctic ported - Saw donated by anonymous and porting by @huskihl
16. Husqvarna 262xp Rebuilt by Stump Shot and ported by Doc Al @drf256 - Donated by @Stump Shot
17. 3 - Oregon EXL 3/8 .050 up to 84dl chains - Donated by @Loony661
18. 3 1/2# Plumb axe with new Hickory handle donated by @Cat 525
19. 2 - Oregon CL 3/8 .050 up to 105dl chains - Donated by @mrxlh
20. Silvey RS2 Square Grinder - Donated by @mrxlh
21. 2 - Stihl 26RS 68dl chains - Donated by @HumBurner
22. Echo 3510 chainsaw - Donated by @Sawdust Man
23. Solo 665,675, 681 new crankshaft - Donated by @Powerstroke Cowboy
24. McCulloch PM850 restored - Donated by @farminkarman
25. Husqvarna 550xp Mark II Ported by MMWS - Donated by @Gentleman and @Mastermind
26. New Husqvarna 353 with bar and chain - Donated by @Duke Thieroff
27. Woodland Pro Stihl mount 16" 3/8 .050 bar and 2-Carlton chains - Donated by @Sawdust Man
28. 066/ms660 CCC Racing Wiseco piston - Donated by @Definitive Dave
29. 372XP or Big Bore CCC Racing Wiseco piston - Donated by @Definitive Dave
30. 20" Cannon Super Duralite bar - Donated by @Definitive Dave
31. Collins paper label 3.5 lb double bit on the #2 hickory handle of your choosing between 28-36” - Donated by @Catbuster
32. Logrite Made in the USA, 60" Xtreme Duty Cant Hook - Donated by @maulhead
33. Stihl 271 Farm Boss like new - Donated by Matt/@JoeDirt
34. Craftsman 16" electric saw CMEC600 Like new - Donated by @FergusonTO35
35. 2 - Oregon EXL or CL chains in 72 or 84 dl - Donated by @PA Dan
36. Double bit ax - Donated by @davidwyby
37. Single bit 4# ax with a Daniel Donnelly handle - Donated by @davidwyby
38. Sheffield pocket knife - Donated by @davidwyby
39. 2 - Vallorbe files for square chain - Donated by @calcutta250
40. 5 - New loops of Stihl 26RS 325 .063"x 67DL and a like new 16" Sugihara LW(Stihl) bar(.063"x 67) - Donated by @Joe Kidd
41. 4 - New Oregon loops 72LGX084 - Donated by @Joe Kidd
42. 2 - Woodland Pro 30LP58dl Chains - Donated by @I saw a lot
43. 3 - Woodland Pro 30LP56dl Chains - Donated by @I saw a lot
44. 300 rounds Winchester 9mm 124gr Nato ammo - Donated by @Joe Kidd

 

[davidwyby]

115 drive links from @Jscb1b please

No short little girly bars for me

 

[dall]

115 drive links from @Jscb1b please

No short little girly bars for me

lol compensation

 

[Firewood Hoarder]

115 drive links from @Jscb1b please

No short little girly bars for me

Hey, it might be short but it feels good to me