Clutch ahoy!!

[MG porting]

Ok I've probably had ran every type of clutch out there for the ms440 and 044 but never ran a Hyway clutch so how many of you guy's have run them are they good or bad tell me the good the bad and ugly.

 

[sawmikaze]

@jmssaws

 

[MG porting]

@jmssaws

Y is there a JMS on here!!!!

 

[Stump Shot]

Y is there a JMS on here!!!!

He no here, just the shuck is all, the jive part is gone....

...although he probably has some fiddy dollar OEM ones left 4 sale. Ain't that so @sawmikaze

I give the AM ones fifty/fifty chance. Some are okay with the springs changed.

 

[MG porting]

He no here, just the shuck is all, the jive part is gone....

...although he probably has some fiddy dollar OEM ones left 4 sale. Ain't that so @sawmikaze

I give the AM ones fifty/fifty chance. Some are okay with the springs changed.

Lol. @sawmikaze has a pretty funny sense of humor!!! Stump Shot the last AM I used didn't do to well although it still works but the finger's that stick between each clutch shoe broke off but two I had to cut off because I was getting a little worried that if they broke off that it could have done some serious damage so I'll post pics of what I'm talking about tomorrow although not all clutches have them but for the most part the AM one's do I ordered a Hyway clutch for my 440 and can't really afford a OEM one I'm hoping the Hyway clutch can take task of what my saw will be putting it through and I do have a set of good used OEM Stihl springs if you think I should?

 

[Stump Shot]

Lol. @sawmikaze has a pretty funny sense of humor!!! Stump Shot the last AM I used didn't do to well although it still works but the finger's that stick between each clutch shoe broke off but two I had to cut off because I was getting a little worried that if they broke off that it could have done some serious damage so I'll post pics of what I'm talking about tomorrow although not all clutches have them but for the most part the AM one's do I ordered a Hyway clutch for my 440 and can't really afford a OEM one I'm hoping the Hyway clutch can take task of what my saw will be putting it through and I do have a set of good used OEM Stihl springs if you think I should?

Yes on the springs

 

[Moparmyway]

Lol. @sawmikaze has a pretty funny sense of humor!!

jms probably still has his clutch ........

Ryan sent him a NIB saw and got back a cobbled together fly by “port job” ......... really just a screw job

I’d say he’s doing rather well, considering the subject

 

[MG porting]

Yes on the springs

Ok it will be done when the clutch arrives sometime next week I hope it's saying that it will be here on the week after but I don't think it will take that long to get here finger's crossed.

 

[MG porting]

jms probably still has his clutch ........

Ryan sent him a NIB saw and got back a cobbled together fly by “port job” ......... really just a screw job

I’d say he’s doing rather well, considering the subject

 

[dmb2613]

I had one on a 660, it flew all to hell, have one on a 440 and it has been fine, I did replace the springs on the 440 should have replaced the ones on the 660

 

[sawmikaze]

jms probably still has his clutch ........

Ryan sent him a NIB saw and got back a cobbled together fly by “port job” ......... really just a screw job

I’d say he’s doing rather well, considering the subject

I put it in perspective...what can I do about it ?

I still owe you one.

 

[Stump Shot]

I put it in perspective...what can I do about it ?

I still owe you one.

Share your experience often, so less folks get more of the same.

 

[huskihl]

I put it in perspective...what can I do about it ?

I still owe you one.

You've moved on now. The last one you had done came back with all its own parts a few days earlier than expected

 

[Lightning Performance]

Meh....Hyway vs Stock OEM Stihl springs is a toss up here. Last two Hyway clutches got OEM Stihl springs. One spring broke on both clutches in the first work day, not my saws. One 046 very lightly ported by me and one bone stock 660. They both are running one Hyway spring now. Time will tell. Buying OE and them braking pissed me off but no damage to the saws.

Good thing both are run by quality operators who saw the chain walking and stopped using them pronto.

 

[MG porting]

Ok I just posted this on the wrong thread I deleted it lol. But anyways I here's what I was talking about last night.

 

[Moparmyway]

I put it in perspective...what can I do about it ?

I still owe you one.

You don’t owe me anything at all, cept the time for a beer if we ever meet

 

[MG porting]

You guys are starting to bring a tear to my eyes love is in the air. Lol.

 

[sawmikaze]

Share your experience often, so less folks get more of the same.

Last time I shared my experience with that slacker everyone defended him and got all pissed at poor old sawmikaze..

 

[sawmikaze]

You've moved on now. The last one you had done came back with all its own parts a few days earlier than expected

Ya but it stunk like porkchops.

 

[Stump Shot]

Last time I shared my experience with that slacker everyone defended him and got all pissed at poor old sawmikaze..

Yup sure did, I remember, then the wave of junk followed, proving you to be correct without question.
Lots of new folks here to spread the word to that were not here to witness the debacle unfold.
I can also see why you would just as soon want to forget the whole fiasco as well.