Check Out This JMSSAWS 064

[Mattyo]

when there is girls....are. girls..... you don't need to think

 

[Manofstihl066]

I read that wrong too. Thought you meant cylinder malfunctioned.
You mean the oiler right?


Sent from my iPhone using Tapatalk

During the second tank of fuel the chain started coasting, hauling ass at idle. Figured it might have been a clutch issue. I ran it a little more then oiler quit working, I checked the adjustment and there was none. Oiler was bad. I did bust the tank out of frustration. I was then skeptical about the integrity of the build so I sent it to Randy to check it out while installing a new oem tank I ordered.

 

[hseII]

He probly can't help ya there

True Story.

 

[Adirondackstihl]

 

[Deets066]

During the second tank of fuel the chain started coasting, hauling ass at idle. Figured it might have been a clutch issue. I ran it a little more then oiler quit working, I checked the adjustment and there was none. Oiler was bad. I did bust the tank out of frustration. I was then skeptical about the integrity of the build so I sent it to Randy to check it out while installing a new oem tank I ordered.

That would have made a good saw video! Lol

 

[Termitebuffet]

lol snacking on what

A piece of summer sausage ,and some extra sharp cheddar cheese

 

[hseII]

During the second tank of fuel the chain started coasting, hauling ass at idle. Figured it might have been a clutch issue. I ran it a little more then oiler quit working, I checked the adjustment and there was none. Oiler was bad. I did bust the tank out of frustration. I was then skeptical about the integrity of the build so I sent it to Randy to check it out while installing a new oem tank I ordered.

Wait A Minute: you didn't bust the Saw over a log like a crazyman? Cause that's what I understand.

 

[Jon1212]

Thank you Gary for a sane insightful post.

If it were not for the dig at my poor mistreated legs........I would be offering you @Jon1212 's moderating gig right now.

Go ahead....he can make fun of your legs too.

 

[Mattyo]

During the second tank of fuel the chain started coasting, hauling ass at idle. Figured it might have been a clutch issue. I ran it a little more then oiler quit working, I checked the adjustment and there was none. Oiler was bad. I did bust the tank out of frustration. I was then skeptical about the integrity of the build so I sent it to Randy to check it out while installing a new oem tank I ordered.

I don't know you... at least I don't think I do. But this is a really rough break. This is a HUGE divisive thread ....over your saw. I really hope my comments haven't been offensive in any way and wish you the best of luck getting this all straightened out. Glad the saw made it to Randy to eval...

 

[Deets066]

View attachment 79177

I found myself tilting my head to side, just like my dog does when he see's treats

 

[GCJenks204]

Canadian girls...

 

[hseII]

That would have made a good saw video! Lol

Yes,
Pics & Video.

 

[Deets066]

Wait A Minute: you didn't bust the Saw over a log like a crazyman? Cause that's what I understand.

 

[dall]

He probly can't help ya there

i think more than you want to say but my give a *f-word is broken and its just the way i am

 

[jakethesnake]

 

[Manofstihl066]

Wait A Minute: you didn't bust the Saw over a log like a crazyman? Cause that's what I understand.

It was one of those where u put on the breaks right before it leaves ur hand kinda thing. If I had given it a full on rob gronkowski spike there would be nothing left of it.

 

[hseII]

i think more than you want to say but my give a *f-word is broken and its just the way i am

I think that was a jab at Dan there Dally: put your Bowie knife back in the sheath.

 

[Deets066]

i think more than you want to say

You lost me

 

[hseII]

It was one of those where u put on the breaks right before it leaves ur hand kinda thing. If I had given it a full on rob gronkowski spike there would be nothing left of it.

Fair Enough.

 

[thomas1]

Is Heath actually gay?

yes/no