Check Out This JMSSAWS 064

[Dub11]

So says the guy asking for pictures of wrongdoing....

I just want more pics of hackery so I could stop seeing posts of defense.

 

[Mastermind]

Kill it
But make it a sticky.

Maybe pare it down to the first few posts I made? Then sticky it?

 

[Mastermind]

Play nice? Yeah, good luck with that....not as long as Randy has legs like a preying mantis...

Me and Mr. Peanut are bros.

 

[DSS]

Almost 60 pages.

Wow. I'm considering locking this up and starting a build thread when I start on the saw.

Is the horse dead?

Thoughts?

Shouldn't you wait till we hijack it first?

 

[dall]

Me and Mr. Peanut are bros.

his legs are bigger and more defined

 

[Mastermind]

Shouldn't you wait till we hijack it first?

Yeah......prolly.

 

[Mastermind]

his legs are bigger and more defined

Jerk !!!!!

 

[dall]

Me and Mr. Peanut are bros.

we know why you dont shave your legs your afraid to cut them off

 

[Jon1212]

I just want more pics of hackery so I could stop seeing posts of defense.

Just buy a JMS Saw.....then it will be in 3D...

 

[USMC615]

This young buck in Mo is very skillful in what he's done to some people concerning the saw work he was paid for. Has he done good by some, sure he has...has he *f-worded others, ABSOLUTELY he has. I think the respect was completely lost, at least on my end, when he said he would reimburse the $1500...then in all too predictable fashion, interjected his 'TERMS AND CONDITIONS', i.e. wanting the saw back first, wanting this thread completely removed, etc, etc.

What part of this kid is *f-wording people, not all, but all it takes is a few or small handful, blames his *f-wordups on the 'they're picking on me again, lynch mobbing, every other excuse and everything else,'...and then wants his cake and eat it too (see Terms and Conditions above), don't some of you get??

This thread has been active since Tues around noontime...I say HUMILIATION, AND RIGHTFUL HUMILIATION, is a good motivational incentive and factor for some folks to, as we say, 'Chit Or Get Off The Pot' and get things right, regardless of expense, to themselves. Shutting this down is saying...'I can screw anyone I want, out of how much I want, all I gotta do is hear about two days worth of chit people are gonna talk about me on a damn forum site, and I can jump right back in the $1500 saddle again.'

I think I'm gonna quit this jet airplane chit I been doing since the mid-80's Marine Corps days, start me up a chainsaw *f-wording business...oops, I meant chainsaw porting business. I'll take them $1500 deals all day long...and all them $300 a saw deals too.

You wanna break his arrogant habit, poor workmanship, and absolute misleading, misrepresenting chit he's pulling on some people...keep this thread going and ride his ass and 'disabled' back like a *f-wording packmule...until he effects change on himself. If not for us who are privied to him now, for all in the future to read and see!!

My two pennies and my opinion solely on this matter...humiliation is a humbling MF'r to overcome sometimes...until you as the individual want to man up, make amends, and fly right.

Enough said...

 

[Sty57]

Maybe pare it down to the first few posts I made? Then sticky it?

I think the point was made in the first few pages. And should be more than enough to show what was going on.

 

[dall]

This young buck in Mo is very skillful in what he's done to some people concerning the saw work he was paid for. Has he done good by some, sure he has...has he *f-worded others, ABSOLUTELY he has. I think the respect was completely lost, at least on my end, when he said he would reimburse the $1500...then in all too predictable fashion, interjected his 'TERMS AND CONDITIONS', i.e. wanting the saw back first, wanting this thread completely removed, etc, etc.

What part of this kid is *frenching people, not all, but all it takes is a few or small handful, blames his *f-wordups on the 'they're picking on me again, lynch mobbing, every other excuse and everything else,'...and then wants his cake and eat it too (see Terms and Conditions above), don't some of you get??

This thread has been active since Tues around noontime...I say HUMILIATION, AND RIGHTFUL HUMILIATION, is a good motivational incentive and factor for some folks to, as we say, 'Chit Or Get Off The Pot' and get things right, regardless of expense, to themselves. Shutting this down is saying...'I can screw anyone I want, out of how much I want, all I gotta do is hear about two days worth of chit people are gonna talk about me on a damn forum site, and I can jump right back in the $1500 saddle again.'

I think I'm gonna quit this jet airplane chit I been doing since the mid-80's Marine Corps days, start me up a chainsaw *frenching business...oops, I meant chainsaw porting business. I'll take them $1500 deals all day long...and all them $300 a saw deals too.

You wanna break his arrogant habit, poor workmanship, and absolute misleading, misrepresenting chit he's pulling on some people...keep this thread going and ride his ass and 'disabled' back like a *frenching packmule...until he effects change on himself. If not for us who are privied to him now, for all in the future to read and see!!

My two pennies and my opinion solely on this matter...humiliation is a humbling MF'r to overcome sometimes...until you as the individual want to man up, make amends, and fly right.

Enough said...

do you want your 1499.98 change back ?

 

[Dub11]

Just buy a JMS Saw.....then it will be in 3D...

Hell to the no. I can fug up my saw all by myself

 

[Mastermind]

JMS still has $1500 he collected for a pile of sh!t, no? Exactly what is the incentive for him not to do it again? He screws somebody over, guys donate money and parts, he laughs all the way to the bank. Repeat ad infinitum.

Thread locking and deletions are from the reasons these things repeat themselves.

I'll ask again.....to what end will be gained by locking, or far worse, deleting this thread?

Why start the fugging thread in the first place? If the end result was for it to get locked or deleted, then the fugging thread should have just been posted on AS.

This young buck in Mo is very skillful in what he's done to some people concerning the saw work he was paid for. Has he done good by some, sure he has...has he *f-worded others, ABSOLUTELY he has. I think the respect was completely lost, at least on my end, when he said he would reimburse the $1500...then in all too predictable fashion, interjected his 'TERMS AND CONDITIONS', i.e. wanting the saw back first, wanting this thread completely removed, etc, etc.

What part of this kid is *frenching people, not all, but all it takes is a few or small handful, blames his *f-wordups on the 'they're picking on me again, lynch mobbing, every other excuse and everything else,'...and then wants his cake and eat it too (see Terms and Conditions above), don't some of you get??

This thread has been active since Tues around noontime...I say HUMILIATION, AND RIGHTFUL HUMILIATION, is a good motivational incentive and factor for some folks to, as we say, 'Chit Or Get Off The Pot' and get things right, regardless of expense, to themselves. Shutting this down is saying...'I can screw anyone I want, out of how much I want, all I gotta do is hear about two days worth of chit people are gonna talk about me on a damn forum site, and I can jump right back in the $1500 saddle again.'

I think I'm gonna quit this jet airplane chit I been doing since the mid-80's Marine Corps days, start me up a chainsaw *frenching business...oops, I meant chainsaw porting business. I'll take them $1500 deals all day long...and all them $300 a saw deals too.

You wanna break his arrogant habit, poor workmanship, and absolute misleading, misrepresenting chit he's pulling on some people...keep this thread going and ride his ass and 'disabled' back like a *frenching packmule...until he effects change on himself. If not for us who are privied to him now, for all in the future to read and see!!

My two pennies and my opinion solely on this matter...humiliation is a humbling MF'r to overcome sometimes...until you as the individual want to man up, make amends, and fly right.

Enough said...

Thank you three guys.

I was hoping to hear just this when I asked about nixing this thread. I feel exactly the same way.

It stays.

 

[T.Roller]

Kinda my point, David.

I know brother.

 

[Dub11]

Alright if hes on disability he can only earn a maximum dollar amount a year. With the "hundreds " of saws done for local loggers he has surely surpassed this amount.

 

[sawmikaze]

This young buck in Mo is very skillful in what he's done to some people concerning the saw work he was paid for. Has he done good by some, sure he has...has he *f-worded others, ABSOLUTELY he has. I think the respect was completely lost, at least on my end, when he said he would reimburse the $1500...then in all too predictable fashion, interjected his 'TERMS AND CONDITIONS', i.e. wanting the saw back first, wanting this thread completely removed, etc, etc.

What part of this kid is *frenching people, not all, but all it takes is a few or small handful, blames his *f-wordups on the 'they're picking on me again, lynch mobbing, every other excuse and everything else,'...and then wants his cake and eat it too (see Terms and Conditions above), don't some of you get??

This thread has been active since Tues around noontime...I say HUMILIATION, AND RIGHTFUL HUMILIATION, is a good motivational incentive and factor for some folks to, as we say, 'Chit Or Get Off The Pot' and get things right, regardless of expense, to themselves. Shutting this down is saying...'I can screw anyone I want, out of how much I want, all I gotta do is hear about two days worth of chit people are gonna talk about me on a damn forum site, and I can jump right back in the $1500 saddle again.'

I think I'm gonna quit this jet airplane chit I been doing since the mid-80's Marine Corps days, start me up a chainsaw *frenching business...oops, I meant chainsaw porting business. I'll take them $1500 deals all day long...and all them $300 a saw deals too.

You wanna break his arrogant habit, poor workmanship, and absolute misleading, misrepresenting chit he's pulling on some people...keep this thread going and ride his ass and 'disabled' back like a *frenching packmule...until he effects change on himself. If not for us who are privied to him now, for all in the future to read and see!!

My two pennies and my opinion solely on this matter...humiliation is a humbling MF'r to overcome sometimes...until you as the individual want to man up, make amends, and fly right.

Enough said...

If we were allowed to post screenshots i could show you guys how full of *s-word and ignorant that dude really is.

He can blow me..so can his girlfriends.

 

[Dub11]

If we were allowed to post screenshots i could show you guys how full of *s-word and ignorant that dude really is.

He can blow me..so can his cousins .

Fixed it.

 

[Mattyo]

@Mastermind

I vote for your idea of paring it down. Any of the off topic stuff discussed dilutes the original point of the thread....which is to prove that this saw is not what was promised. ... any other post other than something to this point can be deleted, and that way its easier to prove the point.

 

[sawmikaze]

Fixed it.

I wish i got threatened online by someone other than ted telling me he's gonna knock me down and suck me off.