Chainsaw Racks/Shelves

[KS Plainsman]

So, I got to thinking the other day about a better way to store chainsaws that takes up as little room as possible and is fairly organized. All my saws have bars on them, the shortest being 20", the longest being 42". They're all just stuffed onto shelves at the moment and I'd like to do something different.

How does everyone else store their saws? There's gotta be some clever racks or shelving people have come up with to store their saws.

 

[Woodslasher]

Cheap Husky pallet racking from Home Depot. Biggest bar in the back, progressively smaller the closer to the edge they get. I can fit a 2100W x 42", 056 x 36", 390W x 32", 372W x 28", 562W x 24", and a 192T x 14" all on one shelf.
I'm pretty sure this is the stuff: https://www.homedepot.com/p/Husky-4...n-W-x-78-in-H-x-24-in-D-HBR782478W4/310651468

 

[Sawdust Man]

I hang some of my saws from the rear handle on a row of barn nails, like this.....

 

[Woodslasher]

I hang some of my saws from the rear handle on a row of barn nails, like this.....
View attachment 343621

I've got an outer dog for the workhorse on the far left, if you want it just pm me your address and I'll send it your way.

 

[Chainsaw Addict]

We do the best to to put them in different places in barn and cover them under junk. Less likely to walk away.

Sent from my SM-G965U using Tapatalk

 

[KS Plainsman]

Cheap Husky pallet racking from Home Depot. Biggest bar in the back, progressively smaller the closer to the edge they get. I can fit a 2100W x 42", 056 x 36", 390W x 32", 372W x 28", 562W x 24", and a 192T x 14" all on one shelf.
I'm pretty sure this is the stuff: https://www.homedepot.com/p/Husky-4...n-W-x-78-in-H-x-24-in-D-HBR782478W4/310651468

That's sorta what I do now, except my shelves aren't quite that big.

 

[KS Plainsman]

I hang some of my saws from the rear handle on a row of barn nails, like this.....
View attachment 343621

I like this for the saws used more often, for sure. The ones I don't use much, don't need to be as accessible, and could easily go on a shelf of sorts, but I like the ones I use often, to be easily grabbed and right now they're all stuffed on shelves as well.

Thanks for the ideas fellas. Keep em coming.

 

[Squareground3691]

Lowe’s steel racks

 

[Backtroller]

I put mine up on those Rubbermaid wire shelves in my shop. Off of the floor and away from my kids

 

[mettee]

I just lay mine on the concrete in the garage

 

[KS Plainsman]

I just lay mine on the concrete in the garage

I used to do that as well, but I'm getting enough of them, that that's a problem now. I'm also going to be limited on space after I move, so I was hoping to utilize something different.

 

[KS Plainsman]

I put mine up on those Rubbermaid wire shelves in my shop. Off of the floor and away from my kids View attachment 343684View attachment 343686

That would definitely keep them out of the way.

 

[Sawdust Man]

I've got an outer dog for the workhorse on the far left, if you want it just pm me your address and I'll send it your way.

Thanks for the offer buddy! but I do have the outside dawg, I'm just too lazy to stick it back on the saw.

 

[sundance]

Cheap Husky pallet racking from Home Depot. Biggest bar in the back, progressively smaller the closer to the edge they get. I can fit a 2100W x 42", 056 x 36", 390W x 32", 372W x 28", 562W x 24", and a 192T x 14" all on one shelf.
I'm pretty sure this is the stuff: https://www.homedepot.com/p/Husky-4...n-W-x-78-in-H-x-24-in-D-HBR782478W4/310651468

Maybe it's just me, but that doesn't strike me as "cheap"!

 

[Woodslasher]

Maybe it's just me, but that doesn't strike me as "cheap"!

Yeah, it was way less when my racking was actually put up.

 

[Squareground3691]

Another rack for the growing family.

 

[Guido Salvage]

Most are on shelves, the ones on the floor are on a rubber mat. Concrete will give a saw the white death.

 

[Dustin4185]

I also use wire shelving and some wood shelves I built.

 

[Bryan Newton]

I'm are currently stored in the back seat of my truck

 

[nixon]

I ran out of room for wall mounts . So , I bought a 2’ x 8’ suspension rack .
Had to cut the down riggers because it would have been hanging down too low ( 24” ) .