SELLING Carbs

[mdavlee]

I have a pile of carbs here I've been collecting for a while. Figure most will need a kit. The 320 was new and installed on a 661 for a few cuts. Make an offer on the lot or pick.

2 HD12 for 372. 1 has bent adjustment screws. Zama C3M for 372

1 Zama 1128 modded by Poleman. Hd16, HD14 that needs H and L screws

WJ69 and Tillotson 320 for 064/660.

 

[mdavlee]

320 is sold

 

[mdavlee]

Picture of them

 

[Dolmar Junkie]

Any of these work with a7910?

 

[Cracker Boy]

Wich work best on 064 tilli or walbro. Just curious

 

[mdavlee]

I just seen these replies. I do have one Poleman modded C3M for 7900 here.

The WJ69 and 76 are my favorites for any 1122

 

[Cracker Boy]

I just seen these replies. I do have one Poleman modded C3M for 7900 here.

The WJ69 and 76 are my favorites for any 1122

What about wj10s

 

[mdavlee]

What about wj10s

Never tried one

 

[Cracker Boy]

Never tried one

Gotcha i like em on 064s never ran one on 066. They are pre epa.sorry to derail your thread thanx

 

[mdavlee]

Gotcha i like em on 064s never ran one on 066. They are pre epa.sorry to derail your thread thanx

Don't worry. I like a good derail and it bumped up the thread

 

[Big1066ih]

I just seen these replies. I do have one Poleman modded C3M for 7900 here.

The WJ69 and 76 are my favorites for any 1122

How much for poleman c3m?

 

[mdavlee]

How much for poleman c3m?

$25. It may need a kit. Don't know when or why it was in the drawer.

 

[Time's Standing Stihl]

$25. It may need a kit. Don't know when or why it was in the drawer.

If he don't want it, I'll take it

 

[mdavlee]

If he don't want it, I'll take it

Sounds good. We'll give him time to answer

 

[Time's Standing Stihl]

Sounds good. We'll give him time to answer

But, but.....ok

 

[Dolmar Junkie]

I just seen these replies. I do have one Poleman modded C3M for 7900 here.

The WJ69 and 76 are my favorites for any 1122

I just figured you were avoiding me
C3M what was that OEM on?
I have one of those magic 7910's that floods and fills the crankcase every once and a while, plus any added performance isn't a problem. I was considering robbing the carb off my 6401, but don't know enough about em to even know if they are the same or at least flow as much. Do you know what kind of modifications Rich does on these?

 

[mdavlee]

7900 family

 

[Dolmar Junkie]

Sounds good. We'll give him time to answer

My 6yr old got his pick stuck inside the guitar, took me a while !He can go ahead and have it, I have 2many irons in the fire at the moment to take something else apart, and I had thought about buying or sending a carb to Rich.

 

[mdavlee]

My 6yr old got his pick stuck inside the guitar, took me a while !He can go ahead and have it, I have 2many irons in the fire at the moment to take something else apart, and I had thought about buying or sending a carb to Rich.

It's no problem. I didn't even know I had it until I looked after I seen your post

 

[Dolmar Junkie]

7900 family

What s stock on 7910 same thing?