Carb's 066-MS660

[Tree Sling'r]

Any users of aftermarket carbs for saws in title have any input? I have always used Walbo, seen Tillosten makes one. Curious about the cheapies, need to get some saws going for some broke friends for less than what Walbo is charging.
Thanks.

 

[jacob j.]

Diamond Dave sent me one of the aftermarket carbs to try, but I haven't gotten around to it yet. I can probably come up with a used carb for you.

 

[mdavlee]

I've used a few from Dave. A bunch of the 44/46.

 

[jmssaws]

I've used 3 or 4 of dd's 69 clones,there just fine

 

[Tree Sling'r]

Thanks fellas

 

[Time's Standing Stihl]

I've used 3 or 4 of dd's 69 clones,there just fine

Do you know what the jet size is on these??

 

[jmssaws]

Do you know what the jet size is on these??

I sure don't,there fixed but whatever they are they feed a ported saw fine.

 

[jmssaws]

They don't tune like a walboro but there still pretty good

 

[paragonbuilder]

I haven't had an issue with an aftermarket carb yet...


Sent from my iPhone using Tapatalk

 

[Fifelaker]

I put one on a friend's 026 it has been going good for about 4-5 months now.

 

[Definitive Dave]

I will say the WJ69 clone from Zama is fine on stock saws, but is little more sensitive to the tuning screwdriver.
Also while the jets are the same size they do not interchange and are all pressed in so you cant swap them like the OEM Wally carb.
I had a guy try to drill out the main for more fuel and it completely went to crap on him, he tried twice and it just ruined the carb.
I don't know him well but he builds a lot of 660s.
I have two builders in Oregon one loves them and one hates them both build a good number of 660s
Dave