Can you guess what got this 660?

[Stump Shot]

A friend of mine got me into shaking the gas can first, good habit to get into I reckon.

 

[skip sail]

i shake the can and the saw,if its been sitting for a bit.
I try and mix at 33/1.
also,a lot of those containers with fuel level marks are completely out of whack.
It pays to check em when you're at a petrol station by filling with exact amounts(assuming the bowser is reading right)
My husky one says 5 litres,when its actually around 4.5 (better than the other way round i guess)
I had a cheap one that i measured at 5.8,and immediately chucked out.

 

[Stump Shot]

I guess when I think about it, saws you build are like children. You take good care of them, buy them the best things then send them off into the world on their own. Only to show back up at your door, broke and needing to stay with you for a while.

 

[jmssaws]

I guess when I think about it, saws you build are like children. You take good care of them, buy them the best things then send them off into the world on their own. Only to show back up at your door, broke and needing to stay with you for a while.

That is a perfect analogy,after all the saws I've done i still worry about every one.

 

[Keith Gandy]

All this time Ive been told on here any oil will work and 50to1 was plenty of oil ??!!

 

[junkman]

All this time Ive been told on here any oil will work and 50to1 was plenty of oil ??!!

When the oil seperates and you tip the saw on the side ,only one side of the piston gets lubes and will seize the gassy only side .

 

[Keith Gandy]

Ive been running quite a bit of Lucas with 93 efree @ 50to1 in my blower, trimmer, and pole saw. No problems

 

[super3]

I had heard that dealers have some kind of a strip they can dip in the fuel in the tank to see how much oil is in the gas, is this true, anybody ever heard of such a thing and if so where could they be acquired?

May be these?

http://www.fullspeedtechnology.com/right-mix-stripstrade.html

 

[hseII]

I would have guessed the Stihl spit out the Husky piston because it tasted horrible .

This!!'

 

[Stump Shot]

May be these?

http://www.fullspeedtechnology.com/right-mix-stripstrade.html

Yeah, something like that, but they say dealers and distributors only.

 

[hseII]

Is just a saw from a loging company , the boss pay for the saws and the operators dont give a sh1t for the equipments

dont worry , the boss have money................... he buy news

This is all too often the case.

If the guy that paid for the saw is mixing the gas, the chance of this happening goes down quick.

 

[OldJack]

May be these?

http://www.fullspeedtechnology.com/right-mix-stripstrade.html

They need to read the last paragraph in their Blurb.

 

[jmssaws]

Most of the loggers I know think nothing about what ratio they use,lots think more oil is just as bad as to little.

Most will change oil if it's on the shelf at the station where they stop every morning,not many will go out of there way for a different oil.
It is what it is, that's what parts are for I guess

 

[panteliss]

Its not only the oil or the ratio most of them they dont have change fuel filters for years they dont have clean the saws for years , the same and for other parts ,
many of them maybe they are pro fallers but they dont know to listen if the saw work good if its too lean or too rich they just know that the saw must make noise and thats it , they never sent the saw for a looking if everything is fine if need a seal or a filter , and if sometihing go bad the first that they do is to put the screwdriver to the L or H thinking that theese screws are the cure of any problem , never mind if a seal leak like crazy they still turn the screws
and if the service tell them ohh now you need 200 or 300 for repairs the only that they know to tell is
sh1t theese husqvarnas are tones of problems i must have buy stihl , or theese stihls are tones of problems i must have buy husqvarna

 

[jmssaws]

Its not only the oil or the ratio most of them they dont have change fuel filters for years they dont have clean the saws for years , the same and for other parts ,
many of them maybe they are pro fallers but they dont know to listen if the saw work good if its too lean or too rich they just know that the saw must make noise and thats it , they never sent the saw for a looking if everything is fine if need a seal or a filter , and if sometihing go bad the first that they do is to put the screwdriver to the L or H thinking that theese screws are the cure of any problem , never mind if a seal leak like crazy they still turn the screws
and if the service tell them ohh now you need 200 or 300 for repairs the only that they know to tell is
sh1t theese husqvarnas are tones of problems i must have buy stihl , or theese stihls are tones of problems i must have buy husqvarna

Pretty much nailed it

 

[panteliss]

I want ask if you have ever see or if you know if the stihl have produce black fuel filters ( not the plastics ) the mesh of the filter

 

[jmssaws]

I want ask if you have ever see or if you know if the stihl have produce black fuel filters ( not the plastics ) the mesh of the filter

I never have seen one of them

 

[panteliss]

I never have seen one of them

the operator of this filter accidently use burn machine oil for two stroke oil............... accidently not that he want



now i dont put pictures of the piston cylinder etc,etc you can imagine them

also accidently again i have see cigarete filter inside of stihl filter ......... for better filtration you know .........

 

[hseII]

the operator of this filter accidently use burn machine oil for two stroke oil............... accidently not that he want



now i dont put pictures of the piston cylinder etc,etc you can imagine them

also accidently again i have see cigarete filter inside of stihl filter ......... for better filtration you know .........

Full Flavor, I'm Sure.

 

[panteliss]

Full Flavor, I'm Sure.

always they use the best tobacos