SELLING Box of Husky 51/55 stuff

[Wolverine]

Pics tell the story. Trying to spring clean before spring. Make me an offer, not lookin to get rich here. I’ll share shipping costs.

Bearings feel tight and spin free. It needs cleaned for sure.

 

[Wolverine]

I have 2 cylinders I just cleaned up. One of these I’d not hesitate to use for a personal saw or a close friend. The other I’d send down the road. If you feel it’s junk, I can omit from the sail.
#1


Small spot between ex port and transfer will catch a pic. The line doesn’t feel as it looks. Doesn’t “catch” a fingernail but you can feel it’s there.

 

[Wolverine]

#2 I’d send it, but you might not. Your choice.

 

[Wolverine]

#2 has these spots. After sanding through all the grits and using a scotchbrite, they still exist. I used a q-tip with muriatic, then cleaned with water, didn’t change. They do not catch a pick or nail.



The below pic also shows a very faint line. This wouldn’t stop me from selling a saw confidently, again ymmv.


That’s all I got now. If I find more, I’ll add it in.

 

[ammoaddict]

Still thinking on it, have you ran across any more parts?

Sent from my moto g(7) power using Tapatalk

 

[Wolverine]

Still thinking on it, have you ran across any more parts?

Sent from my moto g(7) power using Tapatalk

I haven't.