FOUND IT Any dolmar dealers still have a blue 7910?

[huskihl]

Can you make 6401 a 7900 by changinging cylinders

Might need to change the cylinder cover plastic. Decomp might not be in the same spot. Can't remember

 

[Cracker Boy]

You need both piston and cylinder. 64cc is 47mm, 73cc is 50mm and the 79cc is 52mm.

Figured that much but thanx

 

[Cracker Boy]

Might need to change the cylinder cover plastic. Decomp might not be in the same spot. Can't remember

Thats what f150 said he sells kit with cover.think im gonna buy a 6421 buy 7910 cylinder piston kit take baffle out of muffler base gasket delete and woods port cylinder and sell mu ms361 i like my 036 better anyway

 

[SOS Ridgerider]

Might need to change the cylinder cover plastic. Decomp might not be in the same spot. Can't remember

6401 has the decomp on the left. 6421 and 7910 is on the right.

 

[huskihl]

I

6401 has the decomp on the left. 6421 and 7910 is on the right.

I knew it was something like that. Thanks Sondre

 

[SOS Ridgerider]

The one. Bought from Depot had a pinched bar which made it throw Sparks bad. Needless to say I got a discount that covered a new Oregon bar and 2 Stilh chains

Sent from my XT1585 using Tapatalk

The last two I bought had new bars and chains on them, and the guy threw in 2 new bars and chains on top of that. One of the saws had been straight gassed, so the price on that one was great. Lol.

 

[Cracker Boy]

How are there oilers? i have heard of some issues.arnt they only a 1 ring piston?are they inbound or outbound clutch?

 

[Steve]

Oils a 32" bar nicely. Single ring piston. Inboard clutch. Issues as far as you will never regret buying one?

 

[Cracker Boy]

Oils a 32" bar nicely. Single ring piston. Inboard clutch. Issues as far as you will never regret buying one?

Cool im gonna buy one. Just never ran one and im bit leery as i am a diehard stihl guy and dont like husky at all.also what mout does the bar take

 

[Steve]

Husky large mount D009! But you can get an adapter to run stihl bars if it makes you more comfortable

 

[Cracker Boy]

Found a 6421 at home depot gonna go look at got em down to 300 gonna try one. gonna make it a 7900

 

[Steve]

Careful, you will end up selling some stihls. This is just a friendly warning!

 

[astnmacgto]

Careful, you will end up selling some stihls. This is just a friendly warning!

I hear that

 

[Cracker Boy]

Careful, you will end up selling some stihls. This is just a friendly warning!

My 361 most likely my 10 and 12 mm 044 with ks cylinders.ported my 026 with ks cylinder. Ported my 064 ks cylinder and my 036 with old school 034 super ks cylinder aint goin no were.i will say my 036 will run side by side with my 361 .both are ported and polished cylinders 361 has deleted base gasket and 039 carb but my 036 cuts and handles better.i dont like the flippy caps .everyone wants a 361 and the 036 is built so much better .

 

[Cracker Boy]

Do yall honestly prefer them over a stihl? Do you recomend hd filter upgrade too?

 

[Ryan Browne]

Do yall honestly prefer them over a stihl? Do you recomend hd filter upgrade too?

I prefer my 7900 over the ms460 I had. These guys are right about selling Stihls after buying these things. I sold my 460 shortly after buying the 7900. The Dolmar is just a super nice running saw. Very easy starting, incredibly smooth compared to a rubber mounted saw, and it's got style points compared to a stihl.

Now, if I was only gonna have one or two saws, I'd probably just stick with stihl since I have a local dealer, but with the great online support from Carl and Nate, if a guy doesn't mind waiting a day or two for parts, the Dolmars start to look like a great option.

The things I don't like about mine are the limited coil (really just a nuisance for tuning), and that the wrap handle can interfere with chip clearance. Not a deal breaker for me, but worth noting. As others have mentioned, they're very fun saws to run.

 

[Steve]

I haven't purchased the hd filter because for the type of cutting I do the stock filter works great. I was never a stihl fan to begin with. They just don't intrest me. That's all.

 

[Cracker Boy]

I haven't purchased the hd filter because for the type of cutting I do the stock filter works great. I was never a stihl fan to begin with. They just don't intrest me. That's all.

Ouch!!! Thats way i feel bout husky

 

[Steve]

It's all good. Are you a Chevy guy?

 

[Cracker Boy]

It's all good. Are you a Chevy guy?

Im afraid to answer lol but yes why you dont like them either?