660 cylinder

[backhoelover]

what do you guys think about this cylinder. how no more then 12 hrs on saw. engine rebuild with meteor set and new oem carb. pass press and vac test. also do yall think i can save this cylinder? scaring look pretty deep. sorry about the lighting might have to wait till morning to get better pics

 

[mdavlee]

Doesn't look awful. I would clean it and run it if it was mine.

 

[DND 9000]

Is the scaring feelable with the finger nail? I would try to remove the aluminium from the piston with acid or a very fine filling paper (don`t know if it`s the right word)

Edit: I mean the aluminium on the cylinder wall, not the complete piston.

 

[Moparmyway]

Is the scaring feelable with the finger nail? I would try to remove the aluminium from the piston with acid or a very fine filling paper (don`t know if it`s the right word)

If one were to remove all aluminum from the piston, what would one be left with ?

 

[DND 9000]

I mean the aluminium that is on the cylinder wall, coming from the piston. Sorry, my fault.

 

[Redfin]

If one were to remove all aluminum from the piston, what would one be left with ?

Ill take wrist pin and bearing for 400 Alex.

 

[Sty57]

Ill take wrist pin and bearing for 400 Alex.

And rings for a 200.....

 

[TJ the Chainsaw Mechanic]

Might try the @Mastermind method.

 

[danimal]

If one were to remove all aluminum from the piston, what would one be left with ?

Rings and a lump of slag..

 

[Pincher]

If one were to remove all aluminum from the piston, what would one be left with ?

Ill take wrist pin and bearing for 400 Alex.

And rings for a 200.....

Rings and a lump of slag..

And carbon.
What a bunch of comedians!