dangerousatom
Well-Known OPE Member
- Local time
- 7:22 PM
- User ID
- 11828
- Joined
- Feb 25, 2020
- Messages
- 46
- Reaction score
- 59
- Location
- Quakertown, PA, United States
Looking for part numbers or where to buy for a Husky 550xp carb rebuild kit. This is not the Mark II unless the carbs are the same witch I dont believe they are....? Ive bought 3 supposedly correct kits from different places with no luck. Nothing is remotely looking the same. HLsupply doesn't seem to have it listed besides an altogether new carb.
Im chasing an off/on throttle stalling issue after a port and gasket delete. The saw runs great but it stalls as soon as you crack the throttle unless eased into it. I opened the carb to check the micro screen but it looks very clean, and the saw runs the same after reassembly.
Is it possible to swap over the MKII air box and carb assembly ( there are a few on ebay for reasonable price )
Im chasing an off/on throttle stalling issue after a port and gasket delete. The saw runs great but it stalls as soon as you crack the throttle unless eased into it. I opened the carb to check the micro screen but it looks very clean, and the saw runs the same after reassembly.
Is it possible to swap over the MKII air box and carb assembly ( there are a few on ebay for reasonable price )