440 IPL

[Dustin4185]

Does anyone have the IPL for a MS440? I forgot which handle screws go where and also need a few more miscellaneous things. Trying to get this one back together after a MM, timing advance, and base gasket delete.

 

[huskihl]

https://www.google.com/url?sa=t&sou...gggMAI&usg=AFQjCNEXOviKuFeaeb9nS3fa0RltqeKiKA

 

[Chainsaw Jim]

Two short screws go on the bottom. The long one goes in the fat plastic part of the handle while the third short screw goes in the bare metal hole on the side. Some have both long screws on the side but both holes are through the thick plastic part.

 

[Dustin4185]

https://www.google.com/url?sa=t&sou...gggMAI&usg=AFQjCNEXOviKuFeaeb9nS3fa0RltqeKiKA

Thanks

 

[Dustin4185]

The short screws go on the bottom. The long one goes in the fat plastic part of the handle. Some have both long screws on the side but both holes are through the thick plastic part.

Thanks. This one didn't have plastic, just the metal handle. It is a pawn shop special though.

 

[huskihl]

Here's one that downloads to your phone or puter.
https://www.google.com/url?sa=t&sou...ggaMAA&usg=AFQjCNFtSM6mgwQmHmlhXzsBzyCoDhZHuQ