372XT to XPW Conversion Question.

[Derf]

Nice work.
I can tell you how to get a Walbro check valve and fix your HD12. Where did you get the new Zama C3M-EL8?

 

[RIDE-RED 350r]

Good deal. So... How are you liking the Dub-Ya?

 

[Steve]

Nice work.
I can tell you how to get a Walbro check valve and fix your HD12. Where did you get the new Zama C3M-EL8?

I'm listening! I got the EL8 used on eBay and cleaned and kitted it.

 

[Steve]

Good deal. So... How are you liking the Dub-Ya?

So far I like it. I was cutting dry white oak cookies with a 28". It did well. I'm anxious to see how it runs with a few more tanks on it.

 

[Steve]

@Derf The EPA sticker looks great! Thanks.

 

[Derf]

Walbro sells the check valve. You can get the part number through their convoluted website.

You might also be able to get it through Husqvarna part number if you check the 372xp OE IPL for a part number.

Lots of places online to order it from.


There are YouTube videos of how to drive it through the carb into the bore and replace it.

You should contact Rich (@Poleman) and ask about modding the Zama for better fuel delivery for the XPW if you port the cylinder.

 

[Steve]

Walbro sells the check valve. You can get the part number through their convoluted website.

You might also be able to get it through Husqvarna part number if you check the 372xp OE IPL for a part number.

Lots of places online to order it from.


There are YouTube videos of how to drive it through the carb into the bore and replace it.

You should contact Rich (@Poleman) and ask about modding the Zama for better fuel delivery for the XPW if you port the cylinder.

Ordering the check valve online is expensive after shipping. I try checking the Husqvarna ipl. I always seem to have better luck with Zama carbs anyway. Plus I figured if I ever get it ported I'll see if Poleman would work his magic with it it.

Thanks for taking the time to post those videos. They are helpful.

 

[Huntaholic]

PM sent derf!