361 oiler help

[angelo c]

Guys,
Cant seem to find the PN for the famed oiler line...from the oiler to the bar plate cover. Been searching MediaCAt and can't spot it.
Also is changing the 361 oil line as much fun as the 360 ? or can mear mortals complete this task ?

tkx.

 

[big t double]

there isn't one boss...it feeds through the case.

 

[angelo c]

there isn't one boss...it feeds through the case.

so you pick a line and shove it through ?

 

[big t double]

nah...its like the 046 and 066 pump.

 

[angelo c]

nah...its like the 046 and 066 pump.

so what makes the 036/360 such a "fan favorite" procedure ....right up there with the yearly colonoscopy

 

[big t double]

they use the oil line that is rock hard

 

[angelo c]

after an hour or so in the parts washer I could see the line better. doesn't look too bad in the case. Could not see a visible part of the line before some serious soaking.
looks like you disconnect from oiler and pull through from the bar plate then reverse the other way back in with the metal nipple stopper ?

 

[dall]

you must have the 360 and not the 361

 

[stihl saws]

you must have the 360 and not the 361

That's what I'm thinking too.

 

[angelo c]

Definitely 361.
I was thinking it was similar. Had to clean the thing off to see anything.
Hate dirty saws. This thing looks like motor oil was baked on.

 

[huskihl]

Not seeing an oil line. I think they're cast into the aluminum

 

[a. palmer jr.]

Is the number 9 item a rubber grommet going from oil pump to case? If so, then it just goes through the case to the bar...

 

[angelo c]

Not seeing an oil line. I think they're cast into the aluminum

View attachment 52209

Me neither

Is the number 9 item a rubber grommet going from oil pump to case? If so, then it just goes through the case to the bar...

That's fron the oil tank to oiler. I'm talking about oiler to bar pad

 

[huskihl]

Angelo, I think the pump seals to the oil tank line like other stihls. That grommet should be to seal the pump to the case to feed to the bar pad

 

[angelo c]

Angelo, I think the pump seals to the oil tank line like other stihls. That grommet should be to seal the pump to the case to feed to the bar pad

Sorry for the pic quality. This was after a few hours soaking, a purple power bath and some oven cleaner. Took all that to see the line at all.
Click if you love cleaning saws.

 

[paragonbuilder]

View attachment 52244
Sorry for the pic quality. This was after a few hours soaking, a purple power bath and some oven cleaner. Took all that to see the line at all.
Click if you love cleaning saws.

Sure looks like there's a rubber line to me...

 

[angelo c]

Sure looks like there's a rubber line to me...

Can you spot the hole ?
right under the brake band. looks like it wore clean through. always amazed how long abused saws can run with an ape at the controls.

"ah boss....de saw...she no work"

 

[paragonbuilder]

Ah, yes I see it now...

 

[big t double]

weird. Can you post a pic of the whole saw? This is the backside of my 361 oil pump. The top hole feeds the oil passage in the crankcase

 

[dall]

that is a 036 or 360 not a 361 angelo cases will have 1125 stamped on them