346NE vs 254XP vs 55CP...Sibling Rivalry. Results are in!!!!

[XP_Slinger]

Hahahahahahaha. This had me going for a while. Nice. So your selling it right? $200 shipped, I hear

I’d say $200 and $450 shipping and handling. Sound good? Lol!

 

[Deets066]

Saw sounds good Deetsy

Just gettin in on the chit talkin. Lol

 

[paragonbuilder]

No but thanks. My chain is good to go.

Gotta be all new stock chains to be fair josh. Or switch same chain to each.
Chains make a huge difference!

 

[XP_Slinger]

Gotta be all new stock chains to be fair josh. Or switch same chain to each.
Chains make a huge difference!

Yes they do! We’ll do our best Dan, just hope everyone is prepared for multiple videos, we don’t have fancy editing programs.

Did a little tuning, this thing is spinning fast and its nowhere near broken in yet. Still 4 stroking when I lift in the cut. I’m starting to feel like this Saw needs more carb, but that’s obviously a project for after Sunday’s shenanigans are done.

 

[RIDE-RED 350r]

I'll just leave this here.... 024 super running 3/8 chain with an 8 pin picco sprocket. As most of you know that's bigger than a normal 3/8 sprocket

Damn Deets!

 

[RIDE-RED 350r]

Got my 254 “special” all ready to go for Sunday. I’ll admit it’s not stock, just did a muffler mod which is why it looks different than it did. Pulls a 37” bar like a boss now.
View attachment 118156

I don't even know what to say to that...lmao!

 

[RIDE-RED 350r]

That 254 think it's a 346 or sumpin?

 

[paragonbuilder]

I do multiple videos too! Lol
That’s great rpm on that, can’t wait to see results!

 

[Tor R]

Yes they do! We’ll do our best Dan, just everyone is prepared for multiple videos, we don’t have fancy editing programs.

Did a little tuning, this thing is spinning fast and its nowhere near broken in yet. Still 4 stroking when I lift in the cut. I’m starting to feel like this Saw needs more carb, but that’s obviously a project for after Sunday’s shenanigans are done.

View attachment 118163

if she 4 stroke with 14.2k wot I'm 99% sure she will beat your bro's 346.

Sorry all your 346 fans, this is a lost battle!!!

 

[RIDE-RED 350r]

if she 4 stroke with 14.2k wot I'm 99% sure she will beat your bro's 346.

Sorry all your 346 fans, this is a lost battle!!!

Well that's good, I just LOVE being that 1% anomaly

 

[cgraham1]

Pretty sure a 55 is like 51 or 52cc isn’t it? The big bore aftermarket kits are true 55cc or something like that if I remember correctly?
I used to know the details cause I was looking into an eventual replacement cylinder for my 51 but I don’t remember being a big difference in cc between the two.

CP 55 is 45mm bore, 32mm stroke. 50.894 cc

OP55 is 46mm bore, 32mm stroke. 53.181cc

254xp is 45mm bore, 34mm stroke. 54.075cc

346xp is 44.3mm x 32.5mm stroke. 50.093cc

 

[RIDE-RED 350r]

Thanks you Sir! So, we have a stock 50cc vs a ported 50cc vs a stock 54cc.

 

[PA Dan]

Well that's good, I just LOVE being that 1% anomaly

You tell them Joe!

 

[cgraham1]

My bet is on the 395xp to win the whole thing...

 

[skidder]

You tell them Joe!

He’s always been the odd brother. Goofy lookin too.....

 

[RIDE-RED 350r]

He’s always been the odd brother. Goofy lookin too.....

Idk...that pic someone posted of you a couple pages back is pretty goofy looking


You gonna get a 325 rim and new chain or is it run what ya brung? Gotta tell ya, if it's run what ya brung, the natives are going to riot around here!

 

[skidder]

Idk...that pic someone posted of you a couple pages back is pretty goofy looking


You gonna get a 325 rim and new chain or is it run what ya brung? Gotta tell ya, if it's run what ya brung, the natives are going to riot around here!

I guess I’m gunna stop at GKS and grab a .325 sprocket for my 55. Swap the bar from the 550 and throw the new chain I got with my 550 on it so everyone will be running the .325.

 

[RIDE-RED 350r]

Ok sounds good. I'll probably get a new chain for the 46 because it has quite a bit of run time on it. Probably half worn.

 

[XP_Slinger]

I guess I’m gunna stop at GKS and grab a .325 sprocket for my 55. Swap the bar from the 550 and throw the new chain I got with my 550 on it so everyone will be running the .325.

Ok sounds good. I'll probably get a new chain for the 46 because it has quite a bit of run time on it. Probably half worn.

Good plan. I’ll get a new chain too, should be off the same roll when we get them all together. Just hope the factory grind is good, found out today my rakers are too tall for sugar maple, chain skated pretty bad unless I was prying on it. Must be Oregon sets their chains up for pine

 

[RIDE-RED 350r]

Good deal. Moose, grab a new chain for you too..always good to have a spare for the 550 and we will all be on the same page..just keep er outta da deer-tay!