WANTED 3/8 8 tooth picco rim

[Cracker Boy]

I need a coupl 3/8 8 tooth picco rims small spline i need them for my 026 stihl only has 7 tooth available now please help thanx

 

[Gunn]

Dansco still sells them

 

[Cracker Boy]

U got info is that a buisness or membet

 

[KenJax Tree]

Send member @Definitive Dave a message i believe he has some or can get them.

 

[Cracker Boy]

Dansco sells 3/8 but no lp 3/8picco small spline that i saw i checked there web site i could be wrong i did email them i hope and will keep fingers crossed thanx for info

 

[KenJax Tree]

Dansco sells 3/8 but no lp 3/8picco small spline that i saw i checked there web site i could be wrong i did email them i hope and will keep fingers crossed thanx for info

I think @ keith gandy just got one from D Dave. You are correct they are standard 3/8 but Dave cuts them down to fit picco chain.

 

[Wagnerwerks]

Left coast had them for a while...

 

[Definitive Dave]

I should be back in action Tuesday and can get you sorted

 

[Cracker Boy]

No go at leftcoast i will wait for dave on tues i think i found the dansco on fleabay small spline 8 tooth 3/8 lp picco thanks i know the dansco if its the one is about 4 times cost of oem one that was discontinued wich hurts a bit

 

[Cracker Boy]

Thanx for help guys

 

[Lightning Performance]

So whats the deal with these things in Mini or small? I hear 404 cut down works for medium and/or standard spline 7. Then people say to cut down standard 3/8 for smalls and mini. The next guy says, the 3/8 is already too small for the 3/8LP or Picco. First off LP and Picco are 0.365 not 0.375 as 3/8 is. I can't get half of what they say will work for what straight.

I would like to try 3/8 LP and Picco on a ms260 and an 036. I know about the 036 rim updates so that should be the easy one to convert. The bar tail cut will be the time consuming part for the 036 or 260 in 3005 mount.

The next thing I find on 1127 saws is I can get mini or small rims and the drums for those in 3/8 but, still no LP or Picco rims readily available.

Oh btw I would be happy with 7 or 8 pin drive.