2260 bearing fail

[Tor R]

That’s how I feel Tor!

I know some people speak about cold pressing, Husky themself probleby cold pressing them, but.......how many cases do with not hear about blown flywheel bearings....
There is no guarantie that the flywheel bearing are set to the bottom with cold pressing, a tad mag shavings and its defently not to the bottom, and them 550/560/562 has very narrow tolerances.
With heat we know the bearings doesnt shave of anything from the mag case and we know its mounted to the bottom of the bearing pocket.

You will do fine with the heat methode Dan, so will the rest of us who use heat

 

[rattler]

 

[David Young]

Getting close!

You give her the special treatment while in there?

 

[Tpagel]

Getting close!

You give her the special treatment while in there?

It is my saw i talked to Mike tonight and he ran me thru the numbers and such I am excited to get it.

You still got that 2051 in storage?


Sent from my SM-J327V using Tapatalk

 

[David Young]

Yes I do. Let me dig it out time is good for me to move things on.

 

[rattler]

Getting close!

You give her the special treatment while in there?

I did some work on it while i eas in their i put a new top end on this saw also

 

[rattler]

Travis pm me your address so I can send you the piston we talked about

 

[Onan18]

View attachment 123110 View attachment 123111 View attachment 123112

 

[rattler]

 

[cus_deluxe]

Wtf, wheres the triumphant piss revv???

 

[cus_deluxe]

Lol

 

[rattler]

Wtf, wheres the triumphant piss revv???

A couple more heat cycles brother lol

 

[Tpagel]

Sounds healthy Mike put it in a log!

Sent from my SM-J327V using Tapatalk

 

[rattler]

Will do travis

 

[rattler]

 

[Tpagel]

Yeah I like it!!
For those of that don't know Rattler you are missing out. 1st Class all the way.

This saw had been one thing after another and Mike has done all he can to help me.
Truly above and beyond what can be reasonably expected when you send a saw out to a builder.
Thank You sir



Sent from my SM-J327V using Tapatalk

 

[Backtroller]

Nice job Mike. You really brought this saw back from the dead.

 

[rattler]

Nice job Mike. You really brought this saw back from the dead.

Thank you brother.

 

[paragonbuilder]

Looks like you need some test wood...
Saw looks great Mike!

 

[dustinwilt68]

That wood is very hard wood, ask anyone who was there in January, saw looks very stout!!