2016 Christmas Giving Thread

[rocketnorton]

have 2. fit pp336, 365.

 

[Johnmn]

I'll do that 20 inch total super bar I have been trying to sell

 

[rocketnorton]

mount/fits?

 

[Johnmn]

Small husky .050 3/8 and .325 tip

 

[Philbert]

Really nice bar! Any chance it is narrow kerf? That is what my small mount Husky runs.

Philbert

 

[Yukon Stihl]

I will offer up the XL 12 days of Christmas.
I have dug out 12 XL 12's from my saw storage van,they were under it till i moved it and i put them inside.I need the space so i decided to part them out during this cold spell headed our way.
There are red xl12's and super xl's,and a blue one of each.There are a few that turnover smooth if someone wants a complete one.
So i will strip any parts off these that anyone wants,you just pay shipping.And this offer will be good till after the holidays.
My name is Thomas so i will plagiarize Thomas 1's shipping methods,which i heard sometimes run a little slow.So if you need parts in a hurry let me know so i can speed your parts along.
PM me with your requests and address so i can get you a shipping rate and let you know if the parts are there.And that way this thread will be less cluttered.
Thomas

 

[lwhaples]

152 pages Manual is TAKEN!!

 

[Black Dog Chainsaw]

I got all kinds of junk someone can have

What's your address? I'll bring my junk and trade it for yours...

 

[Black Dog Chainsaw]

I'll do that 20 inch total super bar I have been trying to sell

Small husky .050 3/8 and .325 tip

I will ante-up a new chain or two for whoever wants this bar... Gotta check chain stocks...

325 .050 76DL ...........I think....???

I have 2x 325 058 chains listed on AS too so you guys can claim those here if you want to...

Will dig for more treasures as the shop has been getting cleaned... Think there are a couple poulan 3400's sitting around and some random tire chain bags i have from an auction...???

 

[dougand3]

Poulan / Craftsman Fuel Line Kit - fits most any 42cc or smaller saw from 1990-2010. Free Shipping to lower 48. Specify in PM which purge bulb is needed - Snap In or Screw In. Merry Christmas.

 

[mdavlee]

I have a Shindaiwa 575 or 695. It runs but the piston is slightly scored and the clutch cover is pretty much gone. Cover shipping and it's yours. I may not be able to get it out for a few weeks with working 7 days a week.

 

[psuiewalsh]

@Wagnerwerks

 

[tickbitintn]

I'll do that 20 inch total super bar I have been trying to sell

Has this been claimed? I sure could use it...
I have been cleaning out my shed and have a bunch of stuffs to put into this thread hopefully bring some life into it....
Seems a little slow this year, I think we can fix that!!

 

[Black Dog Chainsaw]

I have a Shindaiwa 575 or 695. It runs but the piston is slightly scored and the clutch cover is pretty much gone. Cover shipping and it's yours. I may not be able to get it out for a few weeks with working 7 days a week.

Tell you what, if nobody needs/wants it... I'll do another charity build like we did a year or two back for Jerry with the 034 super (I built it from spare parts everyone donated).

I've got a super nice neighbor (Frank) that has helped me a lot this past couple years, and he NEEDS a decent firewood saw. Maybe this would be a good candidate to fix up for him..? I can clean up the cylinder and find a oem piston or at least one that "fits." Thoughts anyone???

 

[Black Dog Chainsaw]

Really nice bar! Any chance it is narrow kerf? That is what my small mount Husky runs.

Philbert

I don't think Total ever made a NK version of their bars.

 

[mdavlee]

Tell you what, if nobody needs/wants it... I'll do another charity build like we did a year or two back for Jerry with the 034 super (I built it from spare parts everyone donated).

I've got a super nice neighbor (Frank) that has helped me a lot this past couple years, and he NEEDS a decent firewood saw. Maybe this would be a good candidate to fix up for him..? I can clean up the cylinder and find a oem piston or at least one that "fits." Thoughts anyone???

I'm good with that

 

[Onan18]

Tell you what, if nobody needs/wants it... I'll do another charity build like we did a year or two back for Jerry with the 034 super (I built it from spare parts everyone donated).

I've got a super nice neighbor (Frank) that has helped me a lot this past couple years, and he NEEDS a decent firewood saw. Maybe this would be a good candidate to fix up for him..? I can clean up the cylinder and find a oem piston or at least one that "fits." Thoughts anyone???

I like it!

 

[exSW]

I have a Shindaiwa 575 or 695. It runs but the piston is slightly scored and the clutch cover is pretty much gone. Cover shipping and it's yours. I may not be able to get it out for a few weeks with working 7 days a week.

Tell you what, if nobody needs/wants it... I'll do another charity build like we did a year or two back for Jerry with the 034 super (I built it from spare parts everyone donated).

I've got a super nice neighbor (Frank) that has helped me a lot this past couple years, and he NEEDS a decent firewood saw. Maybe this would be a good candidate to fix up for him..? I can clean up the cylinder and find a oem piston or at least one that "fits." Thoughts anyone???

Well I think I could use it because I just scored a complete 680 with spark and a working chainbrake. But also a smoked p&c. I got a NOS Olympic 951 missing a clutch and coil if you want a saw for your neighbor.

 

[mdavlee]

Well I think I could use it because I just scored a complete 680 with spark and a working chainbrake. But also a smoked p&c. I got a NOS Olympic 951 missing a clutch and coil if you want a saw for your neighbor.

Don't matter to me. Someone claim it and I'll get it drained and shipped in a couple weeks when the holiday rush dies down

 

[exSW]

Typed to slow . You guys figure it out. The parts the 951 needs are on eBay now. Just used.