
Looking to move along some fine 2 series husqvarna saws


Husqvarna 254, includes gasket kit and crank bearings, has compression, sure it would be a runner with some fuel system work.


272 xp, runs cuts oils, recent rebuild new bearings/seals gasket delete. Has an am carb



Pair of 288's
the "lite" just fully rebuilt. New Meteor piston caber ring, bearings oem seals with base gasket. Bad lower handle bolts are slightly stripped (plastic tank) still hold, just loosen up. Little bit of jb weld on the lower part of the case, to keep form breaking off and getting cought in fly wheel. Non structural at all.
first time starting the 288
Piston pic is the "parts" 288 decomp is messed up, bought it as a running parts saw.
Really like to trade for a 357/9 and a 395. Not looking for mint, builders are fine. Let me know what you have
If seriously interested I will put a price on them.


Husqvarna 254, includes gasket kit and crank bearings, has compression, sure it would be a runner with some fuel system work.


272 xp, runs cuts oils, recent rebuild new bearings/seals gasket delete. Has an am carb



Pair of 288's
the "lite" just fully rebuilt. New Meteor piston caber ring, bearings oem seals with base gasket. Bad lower handle bolts are slightly stripped (plastic tank) still hold, just loosen up. Little bit of jb weld on the lower part of the case, to keep form breaking off and getting cought in fly wheel. Non structural at all.
Piston pic is the "parts" 288 decomp is messed up, bought it as a running parts saw.
Really like to trade for a 357/9 and a 395. Not looking for mint, builders are fine. Let me know what you have
If seriously interested I will put a price on them.