huskihl's latest activity
-
huskihl replied to the thread HELP! eBay payment issue.Probably is the individual bank. Transfers usually land the next day for me unless I do it late at night -
huskihl replied to the thread HELP! eBay payment issue.Back in the day, the only way to use eBay was with PayPal so that’s what I had set up. I have made thousands of transactions on eBay and...
-
A 7300/7310 would still beat that 460. There is something magical within them that just makes them run exceptionally well. :cool:
-
huskihl replied to the thread Saw displacement classes.The oddballs outside of the 3, 4, 5, 6 ci classes became popular for firewood saws in trying to get popular models into the upper limit...
-
huskihl replied to the thread Sealant or not?.I guess I haven’t heard that 026 base gaskets leak. But when I do use a base gasket, it always gets a thin layer of motoseal on both...
-
I use aviation form-a-gasket (Permatex) for gaskets (both sides), I think I have the red permatex I use with clamshells. If you have...
-
huskihl replied to the thread Sealant or not?.Pretty good system, still used today. They don’t have a habit of leaking there
-
huskihl replied to the thread Sealant or not?.I always put a very thin layer of motoseal on both sides of crankcase gaskets. I’m sure it’s not necessary but I figure that everything...
-
huskihl reacted to Junk Meister's post in the thread 372 sputters when tipped, passes spray test with
Like.
THANK YOU I wasn't even close to your explanation. -
huskihl reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
Flexible, intermittent annoying confusing obnoxious
-
huskihl replied to the thread 372 sputters when tipped, passes spray test.Flexible, meaning something that can change size depending on throttle position. There’s vacuum inside the crank case and intake boot...
-
huskihl reacted to Squish9's post in the thread HELP! How to know when you have too much hook with Like.
That will cut OK. You can adjust things to suit the power and wood type you are cutting. A cutter like that will allow a little more...
-
huskihl reacted to davidwyby's post in the thread 372 sputters when tipped, passes spray test with Like.
I swapped the carb to a 385 carb off my smashed XS 2175 this am and I haven’t put a bar on and put it in wood yet but the tune is stable...
-
huskihl reacted to Woodslasher's post in the thread 372 sputters when tipped, passes spray test with Like.
Out of 5 or more 372-chassis saws I've stripped only 1 had an o-ring present and none of the ones without it exhibited any sort of...
-
huskihl replied to the thread 372 sputters when tipped, passes spray test.Something else I’ve learned along the way. If your carb screws are normally at one and one, turn the H out 2 turns. Hold the saw wide...