huskihl's latest activity
-
medium size bonfire: engage! -
huskihl replied to the thread 372 sputters when tipped, passes spray test.026 failing the tip test is more likely fuel pooling in the intake and in the lower transfer ports. L screw needs to be leaned out a...
-
huskihl reacted to tree monkey's post in the thread 372 sputters when tipped, passes spray test with
Like.
put a carb kit in it -
I expect to head up to Grayling on Thurs. & over to Frankfort Fri. AM.
-
Nice! That sure beats milling with a chainsaw!
-
huskihl replied to the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421.I have actually never done a vacuum test where I couldn’t hold out on the dcomp and not be able to seal it up. I could see where carbon...
-
huskihl reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Yes, you should be able to do that, if it still leaks, then there might be something (carbon) between the decomp and its socket that...
-
huskihl replied to the thread 372 sputters when tipped, passes spray test.Might be able to remove the clutch, worm gear, oil pump off PTO side and pull the bushing and see if the bearing retainer is still in...
-
one week out jerks. a place in town makes great sammiches and if ordered ahead of time they make a party size, so im figurin we’ll get...
-
huskihl reacted to Wilhelm's post in the thread HELP! How to know when you have too much hook with Like.
Or get a grinder! :thumbup:
-
huskihl reacted to STOVE's post in the thread HELP! How to know when you have too much hook with Like.
Thanks so much, I am excited to hone my sharpening skills. I had some nice chips today, even some really long ones from my most recent...
-
huskihl replied to the thread 066 rewind powder code.RAL 7035
-
huskihl reacted to drf256's post in the thread Stihl Ms 261C Help! Idles but dies at full throttle. with Like.
The M-Tron just adds something else to the diagnostic algorithm. That being said, it’s usually NOT the MT itself that’s the problem...
-
huskihl reacted to jacob j.'s post in the thread HELP! So where do we go from here folks? with Like.
Ok guys - I've been directed to lock this up. Thanks.
-
huskihl reacted to davidwyby's post in the thread HELP! So where do we go from here folks? with Like.
That's probably not a bad idea but I'd keep it out of the public eye. Like all of this drama should be.