Bigmac
Mastermind Approved!
- Local time
- 12:09 PM
- User ID
- 5937
- Joined
- Apr 19, 2018
- Messages
- 5,442
- Reaction score
- 37,624
- Location
- Oregon
So I am working on a upgrade the sdc carb on my 125 to a wb, the carb I have has a straight fuel inlet, I am going to need a 90° to be able to hook up a fuel line. I don’t want to ruin the carb, so anybody that has done something similar, or has advice...help!!
This is the measurements od of the inlet
I have a fixed jet Tilly I could rob the inlet off, it’s too large and would need turned down, but is a possibility. The wb37 has a 90° fuel inlet, but I don’t know if it’s available to purchase? And the wb37 is too large for my needs
This is the measurements od of the inlet
I have a fixed jet Tilly I could rob the inlet off, it’s too large and would need turned down, but is a possibility. The wb37 has a 90° fuel inlet, but I don’t know if it’s available to purchase? And the wb37 is too large for my needs