DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Iron.and.bark]

CT is actually a friends that I have been fixing. He had two broken down ones and I made 1 good one and am just trying to get a few bits to complete the second one. This was the fist.

Very nice, full resto or was the paint just like that..

On the subject of air filters, I can find them for my workhorse 152. Solo had the pod filter system on some of the 690's, fits perfectly.



Just feel list posting this again.. lol 166 on the logosol

 

[Black Dog Chainsaw]

Found a full wrap 143 with pancake K&N af.

Sent from my iPhone using Tapatalk

 

[166]

EA3601

 

[Griffdog]

Found a full wrap 143 with pancake K&N af.

The 143 with that little bar will rip if she is a runner. These are probably my favorite big Dolmar. 95cc longish stroke, inboard clutch and sound sweet. I prefer these to the 153 and luckily I have a couple and a pile of parts.

 

[Finnlogger]

EA3601

Did they finally release the saw or are you testing it?

Lähetetty minun Nexus 9 laitteesta Tapatalkilla

 

[Black Dog Chainsaw]

EA3601

I thought I told Makita to quit making saws with those junk tool-less chain tensioners!!

Dear Makita Engineers,
Quit putting garbage tool less chain tensioners on chainsaws because they always brake or never hold adjustment. Also please make a top handle version of your new 36v (2x 18v batt) so I don't have to fix any more top handle saws! Lastly, your power tools should come with a mail in voucher for free makita work gloves with hand size options!

Sincerely,
A person you should listen too!

 

[Black Dog Chainsaw]

Did they finally release the saw or are you testing it?

Lähetetty minun Nexus 9 laitteesta Tapatalkilla

Steve and Scott get some models in advance of their release. Looks like 36cc 3/8LP 16" b&c..?


Sent from my iPhone using Tapatalk

 

[Black Dog Chainsaw]

The 143 with that little bar will rip if she is a runner. These are probably my favorite big Dolmar. 95cc longish stroke, inboard clutch and sound sweet. I prefer these to the 153 and luckily I have a couple and a pile of parts.View attachment 71572

$75 for 95cc and all I had to do was put a good 28" bar and chain on and replace the flywheel cover fan and starter pawls! [emoji16]

Already blocked up 1/2 a cord! [emoji317]

Sent from my iPhone using Tapatalk

 

[166]

Here's another one.

They make them with two bar studs but they are not being imported. It runs better than I was expecting and has decent torque for 35cc.

These are now available. I can't show any pictures of the others yet.

 

[Flint Mitch]

Picked this up from the AS. I gutted the muffler, drilled out the hole so I can adjust the H needle, and tuned after running with fresh mix for a little while. Runs great, sounds good for so small of an engine and really slings some bar oil!!

I just need to locate some"non-safety" loops for 3/8lp .050 52dl

Sent from my XT1585 using Tapatalk

 

[Adirondackstihl]

Picked this up from the AS. I gutted the muffler, drilled out the hole so I can adjust the H needle, and tuned after running with fresh mix for a little while. Runs great, sounds good for so small of an engine and really slings some bar oil!!

I just need to locate some"non-safety" loops for 3/8lp .050 52dl

Sent from my XT1585 using Tapatalk

I would put the brace back in.
Just open up the holes into 1 large opening.
But that brace needs to be in there

 

[Rob Stafari]

Picked this up from the AS. I gutted the muffler, drilled out the hole so I can adjust the H needle, and tuned after running with fresh mix for a little while. Runs great, sounds good for so small of an engine and really slings some bar oil!!

I just need to locate some"non-safety" loops for 3/8lp .050 52dl

Sent from my XT1585 using Tapatalk

@fordf150 at Performance Outdoor Equipment has non safety LP in stock and should be able to help you out with that.

 

[Flint Mitch]

I should have added that I made two spacers to support the muffler screws. I just can't see needing that baffle in there

Sent from my XT1585 using Tapatalk

 

[Flint Mitch]

@fordf150 at Performance Outdoor Equipment has non safety LP in stock and should be able to help you out with that.

Haven't messaged Nate yet but I will. He is always awesome to deal with

Sent from my XT1585 using Tapatalk

 

[Adirondackstihl]

I should have added that I made two spacers to support the muffler screws. I just can't see needing that baffle in there

Sent from my XT1585 using Tapatalk

Well as long as you have some sort of spacer in there, I don't see an issue

 

[Flint Mitch]

I used some aluminum stock I had lying around. Was easy to cut/file to size

Sent from my XT1585 using Tapatalk

 

[ajschainsaws]

View attachment 71748

Here's another one.

They make them with two bar studs but they are not being imported. It runs better than I was expecting and has decent torque for 35cc.

These are now available. I can't show any pictures of the others yet.

Nice looking saw the other brand is still shy don't want to show its face

 

[Finnlogger]

Nice looking saw the other brand is still shy don't want to show its face

Had my hands on one earlier...

Sent from my DMC-CM1 using Tapatalk

 

[Adirondackstihl]

Had my hands on one earlier...

Sent from my DMC-CM1 using Tapatalk

Looks like a Zenoah

 

[Dolmar Junkie]

EA3601

How is this compared to my 401 as far as power and weight?
Also word on the street is that you have talked some of the Queen's subjects out of some 9010's if this is more than a rumor and are going to have one to sell, please PM me the information
Thanks, Matt...