Tecomec pistons (PORTING HELP)

[Mkinslow]

Well at least it didn’t grenade on its first start. Haven’t done a compression check but it feels pretty stout.

 

[sixonetonoffun]

I was wondering that too. My 2065 is open port been looking at options for that. Though it blows close to #160 its a long way from limping.

 

[Mkinslow]

This Tecomec is closed. But I have an oem 365 open with bolt on intake

 

[sixonetonoffun]

Deal of the day still shows up but won't go to cart as oil seals out of stock. For that price I'd get one to play with.

 

[Mkinslow]

Deal of the day still shows up but won't go to cart as oil seals out of stock. For that price I'd get one to play with.

@Gentleman may be able to shed some light on this for you bud

 

[Mkinslow]

Hopefully I’ll get to run my 365 with this p/c this weekend and see how it goes

 

[sixonetonoffun]

Sounds like a good time to me!

My neighbor had a flat on his loader tractor yesterday. So we took a day off today from cutting and put a new one on.

Did cut a quick bucket load of popular after that. To heat his shop for a few of these warmer days.

Putting the chains on after was worse then the 38" tire.

 

[sixonetonoffun]

@Gentleman may be able to shed some light on this for you bud

Hoping it runs out well for you. HL had them available today so I did order one. Figured going from open to closed port might be fun.

If not it only takes a few minutes to put the oem back with a fresh Caber!

Am gonna try modding the Zama instead of putting a walbro on for now.

 

[Mkinslow]

Hoping it runs out well for you. HL had them available today so I did order one. Figured going from open to closed port might be fun.

If not it only takes a few minutes to put the oem back with a fresh Caber!

Am gonna try modding the Zama instead of putting a walbro on for now.

All of it looked pretty good when I got mine,though I did clean up the casting lines and stuff. I’m hoping to get to run it today , probably be this afternoon when I’ll have help videoing as Thursday and Friday is my weekend Put my 026 back together yesterday and messed with my truck so I didn’t have time to run it. My 365 also has the Zama. What mods mods are you doing to the Zama

 

[sixonetonoffun]

Poleman posted this C3M how to.
https://www.arboristsite.com/community/threads/zama-carb-mod-cliff-note-version.275905/

But I haven't checked to see if it's the same type. If not I will have to wing it.

 

[Mkinslow]

Poleman posted this C3M how to.
https://www.arboristsite.com/community/threads/zama-carb-mod-cliff-note-version.275905/

But I haven't checked to see if it's the same type. If not I will have to wing it.

I have heard and read that,but guess I wasn’t thinking this morning lol. So far I haven’t had any problems with mine but I haven’t really ran it either. Hopefully it’ll happen today.

 

[Mkinslow]

Here’s the maiden voyage boys

 

[Mkinslow]

Still need to do the fine tuning, just trying to brake her in before I see what all she’s got in her. This one has a blue coil cuz that’s all I had left, but I believe it doesn’t limit out till 14,800. So I feel it has some more to give.

 

[sixonetonoffun]

Sounded strong. Should only get better as it seats the ring. Nice!

 

[Mkinslow]

Sounded strong. Should only get better as it seats the ring. Nice!

Thanks!! Yeah it feels pretty strong so far. That chain needs to be touched up, it’s got about 15-20 runs on it through that same log. I put it through several heat cycles today to help seat everything. When I get time I’m gonna tweak the tune and see what she’s got

 

[brandonstclair20]

I put a Tecomec piston in my dads MS360 and it runs good. It has excellent compression.


Sent from my iPhone using Tapatalk

 

[Mkinslow]

I put a Tecomec piston in my dads MS360 and it runs good. It has excellent compression.


Sent from my iPhone using Tapatalk

I meant to get a reading on mine the other day but it feels pretty good

 

[Gentleman]

Deal of the day still shows up but won't go to cart as oil seals out of stock. For that price I'd get one to play with.

Which kit is it?

 

[Mkinslow]

Which kit is it?

I think he was trying to get a Tecomec p/c kit with gasket set like you helped me out with when I started this thread.

 

[Gentleman]

The gasket set just came back in stock. Should be able to order now.