JT78
Super OPE Member
- Local time
- 12:35 PM
- User ID
- 1773
- Joined
- Aug 29, 2016
- Messages
- 404
- Reaction score
- 1,091
- Location
- Burlington, nc
I did a search but didn't find much.
So the saw will crank and idle fine you can flip it on each side and spin it around and it doesn't change you can even lightly touch the throttle and the saw will start to rev but the moment that the bottom throttle starts to open it bogs. I'm thinking that there has to be an air leak somewhere or possibly an issue with the carb? Anybody have some experience with this top handle saw that can help shed some light?
So the saw will crank and idle fine you can flip it on each side and spin it around and it doesn't change you can even lightly touch the throttle and the saw will start to rev but the moment that the bottom throttle starts to open it bogs. I'm thinking that there has to be an air leak somewhere or possibly an issue with the carb? Anybody have some experience with this top handle saw that can help shed some light?