Any Update on this Beast ?
Sum ting got hawt.
Yes, the trouble is it needs to be 1.25" ID and I see those folks have a few elbows that size that could be cut. Otherwise trying to find some rubber type hose like I did for the transfer hoses. Originally I did not give heat a big enough consideration being it was going to make one cut and done. This obviously was a mistake.
https://www.siliconehose.com/1-250-id-4-ply-silicone-saej20-compliant/
https://www.siliconehose.com/1-250-...nforced-with-helical-wire-support-blue-color/
Much cheaper options, not sure about heat rating though.
Heater hose would work.
A foot of it from the auto parts store can't be more than a couple bucks.Prolly so, this stuff wasn't that expensive... so I pulled the trigger.
A foot of it from the auto parts store can't be more than a couple bucks.
Not if it came from Nissan...Heater hose would work.