Jimmy in NC
Pinnacle OPE Member
- Local time
- 10:02 PM
- User ID
- 57
- Joined
- Dec 23, 2015
- Messages
- 1,994
- Reaction score
- 8,011
- Location
- North Carolina
Local fellow brought me a load of saws to go through, again. 4 - 55s that he uses in his small clearing and septic business. This one had a broken case corner by the chain catcher. Told me it ran fine but with the corner busted it has only 3 of the 4 AVs causing it to flop around. I tried to talk him out of it saying we could buy another for the same money or cheaper than parts and my labor.. he insisted. He sold it saying he wanted one I have gone through as he trusts my work and I always take care of him. OK.
I took pictures of the process. Not a step by step... but a bunch of pictures. If you have questions I will try to answer them. It's a saw I rebuilt 18 months ago with a Hyway closed port top end. Base gasket delete. It's holding up fine. Piston has a carbon line on it but he was fine with it and I have confidence in it. Starts and runs well so I'm happy with it. Hyway seals, OEM gasket set. Hyway AVs.
Sent from my SM-G955U using Tapatalk
I took pictures of the process. Not a step by step... but a bunch of pictures. If you have questions I will try to answer them. It's a saw I rebuilt 18 months ago with a Hyway closed port top end. Base gasket delete. It's holding up fine. Piston has a carbon line on it but he was fine with it and I have confidence in it. Starts and runs well so I'm happy with it. Hyway seals, OEM gasket set. Hyway AVs.
Sent from my SM-G955U using Tapatalk