JONSERED Jonsereds

[Homelite410]

I love my 5105 and believe it is the strongest and smoothest stock 50cc on the market as far as I can tell (have tried all brands). But I still prefer the 2152 with .325 chain for light trimming, brush ,etc. It's just a bit lighter, thinner and easier handling.

Sent from my SM-S320VL using Tapatalk

It has good sideways balance huh Ron?

 

[Ronaldo]

It has good sideways balance huh Ron?

Most excellent, Mike!

Sent from my SM-S320VL using Tapatalk

 

[FergusonTO35]

It has good sideways balance huh Ron?

Huh?

Anyhow, gave the 2150 a good workout today on the dead elm tree. I used it to cut up all parts of the trunk and large limbs from 8-14" diameter. The Jonny did quite well, not as fast or smooth as the Dolly but definitely in the rear view mirror. The 2150 is surprisingly loud for a stock late model saw with a distinctive high rpm howl. Much more so than the Dolly even though it tops out around 1000 rpm lower. I do keep an eye on the muffler and it remains snug and properly fastened. For $125.00 purchase price plus $40.00 for a new Oregon Pro-Lite 18" bar and chain I'm quite happy.

 

[chainsawlady]

I noticed that you have a Ferguson TO-35 tractor. I have 4 owners manual for that tractor, and if you or anyone else would like to have them please contact me.
chainsawlady

 

[FergusonTO35]

You are too kind, PM sent.

 

[Mycamaro_68]

Howdy fellas,
I know a guy that has a Jonsered 920 that looks to be complete but he says it has a scorched top end. He wont give me a price on it and seems like he thinks it is worth it's weight in gold. Just curious what kind of price range something like this would be in. It's definitely used but not totally destroyed. I assume locating a good top end is going to be a challenge.

 

[mdavlee]

$100 tops

 

[T.Roller]

Howdy fellas,
I know a guy that has a Jonsered 920 that looks to be complete but he says it has a scorched top end. He wont give me a price on it and seems like he thinks it is worth it's weight in gold. Just curious what kind of price range something like this would be in. It's definitely used but not totally destroyed. I assume locating a good top end is going to be a challenge.

Yeah good luck brother lol like @mdavlee said $100

 

[Mycamaro_68]

$100 tops

That's about what I had in mind too, thanks!

 

[Dub11]

That's about what I had in mind too, thanks!

I'd look for a good top end first.

 

[lehman live edge slab]

My uncle gave me this today to put in my saw collection. 3 full quart cans of jonsereds 2 cycle oil anyone have an idea how old?

 

[taplinhill]

View attachment 89862
My uncle gave me this today to put in my saw collection. 3 full quart cans of jonsereds 2 cycle oil anyone have an idea how old?

Early to mid- 1970's.

 

[justoldsaws]

Took this old jonny 80 out cutting Aussie hardwood yesterday, dont let its appearance fool you, its beat up and knocked around but runs like a champ, lots of power. A real lot of fun.

 

[FergusonTO35]

View attachment 89862
My uncle gave me this today to put in my saw collection. 3 full quart cans of jonsereds 2 cycle oil anyone have an idea how old?

Wow, very cool find. Where ya gonna put 'em? Someday my wife is going to let me display my old Massey Ferguson gear lube cans in the living room...

 

[lehman live edge slab]

Wow, very cool find. Where ya gonna put 'em? Someday my wife is going to let me display my old Massey Ferguson gear lube cans in the living room...

No idea yet, probably with my saw collection on a shelf. Only problem is I don't have any jonsered saws.

 

[justoldsaws]

Probably been discussed before, what year did Jonsereds change their name Jonsered?
Early 1980?

 

[lehman live edge slab]

Did a little research and sounds like somewhere between 80 and 84 the s was gone on everything. This was due to it taking awhile for parts to go and models to switch after the Electrolux take over in around 1978. So had I'd researched earlier I'd have know the oil cans to be in the 70's or real early 80's

 

[Wolverine]

 

[Hot Husky 365]

 

[Canadian farm boy]

View attachment 93728
View attachment 93731 View attachment 93732

What did you say? I didn't hear you. Lol.
Looks good