Best Buy Co, Inc. Buy Used Saws CCC Ebay Store HLSupply Daily Deals

Hyway MS660 Pop-up Piston.

Discussion in 'Chainsaws' started by Brewz, Jan 14, 2018.

  1. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    I was sent a newly developed MS660 piston from Hyway for testing.
    I was honored as they said it was the only test piston sent to Australia.

    Today I got out to compare it with an out of the box stock Hyway piston,
    I had a little oil pump trouble on the 2nd run but you get that with a china saw :facepalm:

    Anyway, I was quite surprised at the outcome.

     
    Tor R, Cut4fun, sawmikaze and 18 others like this.
  2. drf256

    drf256 Dr. Richard Cranium (“RC” to Muh pals)

    Joined:
    Dec 29, 2015
    Messages:
    5,972
    Likes Received:
    35,308
    Trophy Points:
    528
    Location:
    Strong Island NY
    Great vid Tony.
     
    Moparmyway, Dub11, Brewz and 2 others like this.
  3. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    Thanks mate.
    Here is a pic of the piston


    IMG_4327.JPG


    IMG_4328.JPG
     
    Tor R, Cut4fun, sawmikaze and 9 others like this.
  4. smokey7

    smokey7 Pinnacle OPE Member

    Joined:
    Feb 3, 2016
    Messages:
    1,052
    Likes Received:
    2,321
    Trophy Points:
    260
    Location:
    Detroit
    Very cool. Did you check squish with the new pop up piston? Seems to have made a meaningful difference. It seemd to hold rpm well with both pistons but just a little better with the popup. Nice work
     
    Tor R, Moparmyway, Brewz and 2 others like this.
  5. jacob j.

    jacob j. Jon1212 Approved!

    Joined:
    Dec 24, 2015
    Messages:
    3,317
    Likes Received:
    19,946
    Trophy Points:
    503
    Location:
    Beezlebubba
    Great video :campeon:
     
    Tor R, sawmikaze, CR888 and 3 others like this.
  6. Frank bierce

    Frank bierce ONE OF THE GREATEST!

    Joined:
    Dec 24, 2015
    Messages:
    3,214
    Likes Received:
    10,414
    Trophy Points:
    368
    Location:
    Oregon
    Well done Tony!! Looks like a good little bit of improvement!
     
  7. blsnelling

    blsnelling Friend of the Riff Raff

    Joined:
    Jan 8, 2016
    Messages:
    927
    Likes Received:
    4,935
    Trophy Points:
    302
    Location:
    Franklin, OH
    I highly recommend you replace those circlips with OEM before one of those ears breaks off and trashes the cylinder. The saw sounds good.
     
    Brewz, smokey7 and RI Chevy like this.
  8. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    Yeah like I said in the video, the clips are getting changed out.
    The piston is coming out and getting lightened to be used in a race saw 066 project I have going on
     
    Tor R, sawmikaze, Lootbug and 2 others like this.
  9. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    I didn’t measure squish but I did check crown height with both mounted on the one pin and they were identical heights
     
  10. smokey7

    smokey7 Pinnacle OPE Member

    Joined:
    Feb 3, 2016
    Messages:
    1,052
    Likes Received:
    2,321
    Trophy Points:
    260
    Location:
    Detroit
    Correct me if im wrong in thinking that you mean that the squish area of the piston is same on both pistons? And that the pop up portion protrudes beyond the top of the stock crown height. So piston is truly like a welded popup piston and not a machined in one. Very nice if its like im picturing it to be.
     
    sawmikaze, Brewz and Lootbug like this.
  11. mdavlee

    mdavlee Hillbilly grinder

    Joined:
    Dec 28, 2015
    Messages:
    12,147
    Likes Received:
    51,751
    Trophy Points:
    496
    Location:
    TN
    Yes that is correct in your thinking. Drop in compression increase without machining.
     
    Tor R, sawmikaze, Brewz and 2 others like this.
  12. Poleman

    Poleman Pinnacle OPE Member

    Joined:
    Jan 18, 2016
    Messages:
    476
    Likes Received:
    1,836
    Trophy Points:
    208
    Location:
    Rapid City,S.D.
    Wow Brewz, AWESOME detailed testing!!!! Your saw sounds good!!!!


    :campeon:
     
    Tor R, Brewz, Lootbug and 1 other person like this.
  13. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    That’s exactly what it is mate
     
    Tor R likes this.
  14. Wonkydonkey

    Wonkydonkey Pinnacle OPE Member

    Joined:
    May 14, 2017
    Messages:
    676
    Likes Received:
    1,240
    Trophy Points:
    208
    Location:
    Sussex, Uk
    Umm, I,m lovin the popup, your saw sounds awesome too.

    Btw, top video,

    Cheers
     
    Tor R and Brewz like this.
  15. Brewz

    Brewz Pretty don't cut faster

    Joined:
    Jan 16, 2016
    Messages:
    3,998
    Likes Received:
    12,116
    Trophy Points:
    393
    Location:
    Hunter Valley - Australia
    Thanks mate.
    The saw is a Chinese copy running a near stock cross performance top end.
    I have raised the exhaust from 104 to anout 101 and reshaped the exhaust roof but that’s it.

    If you look at the wash on the flat piston when I take it out in the video you can see that the pto side upper is opening before the flywheel side so I plan to go back in to correct that, lighten up the piston a bit and open up the windows and also change those rubbish clips for OEM.

    See how it goes then!
     
    Tor R, smokey7, Cut4fun and 2 others like this.
  16. CR888

    CR888 Pinnacle OPE Member

    Joined:
    Jan 9, 2016
    Messages:
    1,574
    Likes Received:
    5,635
    Trophy Points:
    330
    Location:
    Australia
    Saw sounds and runs well. Good simple review that shows differences with just a piston swap. Does though kinda make me a little ill seeing a clone run every bit as well as my OEM saw that owes me $1250. Good Job!
     
    Tor R and Brewz like this.
  17. Cut4fun

    Cut4fun Redneck Chainsaw Repair

    Joined:
    Dec 23, 2015
    Messages:
    2,900
    Likes Received:
    9,411
    Trophy Points:
    325
    Location:
    Ohio
    Nice work. Thanks for sharing.
     
    Tor R and Brewz like this.
Loading...

Share This Page

Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice