hoggamoose
New OPE Member
- Local time
- 10:56 AM
- User ID
- 10808
- Joined
- Oct 25, 2019
- Messages
- 2
- Reaction score
- 0
- Location
- Massachusetts
Hello, I had trouble with my Husqvarna 240 saw. So, I went through it and rebuilt the carb (original Zama W33A), new gaskets, cleaned the air filter, new fuel filter, new fuel and fuel lines. I started it yesterday, but it won't idle. Running very rich, smokes and oily exhaust.
No matter how much I adjust the "L" screw it doesn't change.
What is a good "T", idle adjust starting point? I started with the "L" and "H" screws at 2 turns out.
Thank you!
No matter how much I adjust the "L" screw it doesn't change.
What is a good "T", idle adjust starting point? I started with the "L" and "H" screws at 2 turns out.
Thank you!