Holiday Giving Thread

[Clemsonfor]

Getting back on track...

Up for grabs is an Oregon chain sharpening jig and a crack free Jonsereds 621 top cover.

View attachment 102313

Great sharpener jig. Merry Christmas

Sent from my SM-G900V using Tapatalk

 

[Dolmar Junkie]

Yeah that picture that you're talking about that diagram is what a lot of four-wheel drive guys used to find axles to pick. And also know what you're looking at underneath the truck

Sent from my SM-G900V using Tapatalk

I always go directly to the Dana's, trucks and hot rods...

 

[Philbert]

MSA Forestry Helmet
MSA smooth top forestry helmet with face shield, dust guard, hearing protectors, 4-point ratchet adjustable suspension.
Helmet is new, but was used for display, so it may have a few scuffs on it.
*Prefer that it go to someone who does not currently have a forestry helmet.*
*Please send me a PM if interested; I will pick a name in a few days and post the winner.*
Recipient covers shipping. Also ask that recipient send a photo of themself wearing helmet that I can share with the original donor.

Forestry helmet is going to Marshy.

Please send me a PM with you mailing address, etc. and we can work out details.

Thanks.

Philbert

 

[Onan18]

I have a pair of 335 XPT engines, one has some time on it but will run, the other still has the machine marks on piston, barely used. Also have mufflers for both.

Cost of the ride.

Claimed 12/22/17

 

[jacob j.]

I have a pair of 335 XPT engines, one has some time on it but will run, the other still has the machine marks on piston, barely used. Also have mufflers for both.

Cost of the ride.

I can use one Joe- which ever is in worse condition. I'm rebuilding a 335 for a local arborist training program.

 

[Onan18]

031 parts saw, locked up, don't know anything about it. Cost of the ride.

 

[Onan18]

Echo PB-210E engine with fan, recoil housing broken, engine turns over. Cost of the ride.

 

[Clemsonfor]

View attachment 102315 View attachment 102316 View attachment 102317 View attachment 102318
031 parts saw, locked up, don't know anything about it. Cost of the ride.

What models share this ignition system. I have a saw that I suspect coil and ignition. U can't remember what number mine is though.

Sent from my SM-G900V using Tapatalk

 

[Onan18]

I can use one Joe- which ever is in worse condition. I'm rebuilding a 335 for a local arborist training program.

They are both yours, PM me your address please. Merry Christmas.

 

[Dolmar Junkie]

Forestry helmet is going to Marshy.

Please send me a PM with you mailing address, etc. and we can work out details.

Thanks.

Philbert

Mr.Philbert, your parcel should be arriving soon, I believe she got it shipped day before yesterday, if for some reason it doesn't let me know. Expected delivery on the 21st according to the receipt...
Merry Christmas, Matt

 

[Onan18]

What models share this ignition system. I have a saw that I suspect coil and ignition. U can't remember what number mine is though.

Sent from my SM-G900V using Tapatalk

Just the 030 and 031 that I know of, may fit others but not sure.

 

[Clemsonfor]

Just the 030 and 031 that I know of, may fit others but not sure.

I looked. I am almost positive the saw I have is an 032. That's what I called it in a PM I just looked up. That sounds right anyway.

I don't see the same switch that the saw I have has on the back on that saw.

But If someone knows if it will work I will take it. But if the ignitions are different I would have no use for it.

Thanks. Merry Christmas

Sent from my SM-G900V using Tapatalk

 

[tickbitintn]

Getting back on track...

Up for grabs is an Oregon chain sharpening jig and a crack free Jonsereds 621 top cover.

View attachment 102313

Would one be able to square file with that setup?

Sent from my XT1635-01 using Tapatalk

 

[Philbert]

Would one be able to square file with that setup?

A lot of guys have tried to square file with those types of jigs. I will link you to a couple of A.S. threads and let you read the comments directly.

As for regular, round filing, you can get extremely sharp, consistent cutters if you just spend a little time to learn how to set it up correctly. I have several variations of these.

Philbert

https://www.arboristsite.com/community/threads/the-oregon-file-guide-modded-for-square-filing.69509/

https://www.arboristsite.com/community/threads/granberg-file-n-joint-revisited.193630/

(EDIT; another) https://www.arboristsite.com/community/threads/granberg-chisel-bit-file-n-joint.62604/

 

[Philbert]

I have a pair of 335 XPT engines . . .

WOW! Those look like they came out of aircraft!

Philbert

 

[jacob j.]

WOW! Those look like they came out of aircraft!

Philbert

I'll bet with some machine work (lightening and removal of exterior material)- four of those engines would make a dandy drone.

 

[Marshy]

Would one be able to square file with that setup?

Sent from my XT1635-01 using Tapatalk

It looks like it to me.

Thank you for the forestry helmet @Philbert. Much appreciated.

Also, big thank you to @Mycamaro_68 for a 72dl loop of Woodland Pro chain. (I found out it's made by Carlton. Good stuff.)


I went rummaging through some stuff and found a pair of climbing spurs. The leather and pads need replacing but otherwise look functuonal. I know nothing about climbing and picked these up this past summer yard sailing lol. They are probably lineman spurs. They have aluminum body. Free to good home for cost of shipping.


Also still available is the Iron Age size 14 EEE steel toe boots (made in 'Merica).



But wait there's more! Also available is a pair of uninsulated steel toe logger boots by Iron Age, size 14 D. I wore them once so some small scuffs are included. I wear size 13 and these would fit well with a very thick pair of socks.



Please cover shipping.

 

[BrokenSVT]

I went rummaging through some stuff and found a pair of climbing spurs. The leather and pads need replacing but otherwise look functuonal. I know nothing about climbing and picked these up this past summer yard sailing lol. They are probably lineman spurs. They have aluminum body. Free to good home for cost of shipping.
View attachment 102326 View attachment 102327 View attachment 102328


Please cover shipping.

What with my current climbing affliction, it's taking everything in my being to say no to these. I've already claimed something from the thread.

My Chinuckistanian covers were claimed! I'm sending them out today. Glad to see them go to a good home.

 

[Onan18]

Box-O-359 everything is there besides the carb and filter holder assembly (marked for my Dads 346). Case has one crack in the rib that is shown. Included is the original top end that may clean up and a new AM 357 top end. Clutch cover is missing the chain brake stuff. WILL NEED CASE SPLIT AND NEW BEARINGS. Cost of the ride.

 

[Whitty21]

View attachment 102336 View attachment 102337
Box-O-359 everything is there besides the carb and filter holder assembly (marked for my Dads 346). Case has one crack in the rib that is shown. Included is the original top end that may clean up and a new AM 357 top end. Clutch cover is missing the chain brake stuff. Cost of the ride.

I am interested in this if no one has grabbed it yet and you would ship to Canada