350 Husky upgrades :)

[BGE541]

So just thought I'd post some progress on this here. I have no lathe, mill or other neat stuff, but I got a Foredom and some thinking going on, may turn out... Started as a 350 and had a 359 top end laying around so why not... Work in progress. Anyone have a 199 carb to donate/sell?

Thoughts?

 

[Adirondackstihl]

Just use a 191

 

[Wagnerwerks]

This isn't a grind and drop in deal... It's been done but required more machines than you admittedly have.

 

[huskyboy]

Not only is the bore different but the stroke as well is different on the 359 if I'm not mistaken

 

[Wagnerwerks]

Not only is the bore different but the stroke as well is different on the 359 if I'm not mistaken

You're not mistaken.

 

[huskyboy]

Piston wrist pin size different too?

 

[Wolverine]

Port that 350 jug! They run pretty dam good after. Here's the Jonny version, ported w/ a flat top piston (riser base sanded to achieve squish before porting).

 

[BGE541]

I have ported several 350s and wanted something different. Mike is helping me out with the required lathe work for wrist pin bushings and cutting base.

 

[Chainsaw Jim]

What's your plan for keeping the pin in place once the circlips have secured only the bushings?