Search results

Selling an older Altec 12" drum chipper. (chuck and duck style). This chipper operates but is old. It has a 4 cylinder Ford engine and runs on gasoline. I'm not sure why they call these "whisper chippers" as they're loud as all get out. The chute is fixed and only discharges forward. This will...

I've been struggling over the last few years to "undo" some of the "do" I did previously regarding this crazy CAD thing. About a year ago I sold all my Mac and Poulan stuff to a guy in one lot. That was a bunch of saws and parts. On Saturday, I sold off all my vintage Homelite stuff to a guy...

Selling a good condition Husqvarna bow bar. This bar appears to have little use on it. It's a .050 gauge bar and the overall bow dimensions are 22 3/4" long tip to end, 14 3/8" wide and the slots are a smidge less than 3/8". This bar is marked Husqvarna and Sweden. The label is in poor condition...

I've arranged to sell ALL of my Poulan saws, parts and related. Also, ALL my McCulloch saws, parts and related. This will make a big dent in my saw hoard. Next up will be my large vintage Homelite accumulation. When I'm eventually done, I won't have any saws/parts except for Stihl and Husqvarna...

Selling a Stihl chainsaw bar that has barely been used. It's a Stihl Rollomatic E (green dot) and is in like new condition. The bar is straight and there is no paint loss. (see pics) I bought this bar at an estate sale (too bad no saw in sight) and am re-selling it cheap since I have no need for...

Everyone in western FL and much of GA needs to get their chainsaws sharpened up and a supply of fuel mix laid in. Michael looks like it could create some trouble. I'm particularly concerned about a property we have in Milton, FL. It's far enough from the coast to not get storm surge and so forth...

Curious as to how you got to the present lineup from where you started? My first saw was a small Skilsaw. I think it was a model 1616 or something like that. I eventually gave it to a friend after having it many years and he gave it to a friend subsequent to that. It may still be out there...

Been trying hard to thin my CAD accumulation. I've cut back on almost all saw purchases. Can go on a road trip and not read every Craigslist along the route. My spreadsheet still shows I have over 60 saws in various condition from "basket case" to on the shelf ready to go. Now that Groundi and I...

I have a couple of MS460's that one of my chainsaw customers brought to me. He wants me to take both of them and make one good saw. He said he's ok with aftermarket parts. Well, they were both run over by a skidsteer when nearly new. Problem is that most of the same parts are damaged. They both...

Selling a 28" Sandvik bar. The bar is used but in good condition. It's flat and the sprocket turns smoothly. A bit of rust in the mount area but not an issue. No burr on the rail. It's obvious it has low hours on it. See pics for details and fitment data. Goes to the 48 states for $50.00...

Well, I was doing really well in my CAD recovery program. In fact I have been gradually clearing things out of my workshop in an attempt to make it a more friendly work environment. I've taken a few chainsaws in on trade towards another one but haven't actually purchased one outright for a long...

Selling a box full of Stihl 1127 series cylinders. 1 of these is a 45mm for a Stihl 029 and the other 3 are 46mm and fit both the 029 Super and MS290 which take the same cylinder. There are no pistons, just the cylinders. At least 3 of these will clean up fine, the 4th is a maybe but is probably...

Selling off a few leftover OEM MS200T parts. I have two complete crankcases from saws I parted out. These have not been split, just "as removed" with the rod, piston, bearings, seals and whatnot still intact. Also including two cylinders and a bucking spike. I want to sell all of it together for...

@Mastermind @Jon1212

Selling a nice condition Stihl 026. This is an older 026 with the riveted top tag. It still has the plastic wrap on the tag and would look better if it was peeled off as it's wrinkled up. As far as I know the saw is OEM. I've only done carb work on it and never had the saw apart so can't be...

Selling this very nice condition 026. I've owned it for a number of years but haven't used it all that much as I have, ahem, other saws too. It's one of four 026 saws I own. (all runners) As far as I know, this saw is all original. The cylinder is oem and I'm not aware of any aftermarket parts...

It drives me bonkers that nearly all the aftermarket sellers make no differentiation between plastics on the 029, 029S, 039 and the newer MS290, MS310 and MS390. While a few of the earliest MS series saws had the flat top, almost all of them have the later style profile with the hump on the top...

Got all the Motoseal 1 nicely spread on the surfaces and clamped up the clamshell on the Stihl 039 engine I was rebuilding and then a realization struck me... I should probably have put circlips for the piston pin in there. Rats! "We know it's right, we did it twice"

I have a middle aged Stihl 026 that sat unused for a number of years. The fuel hose was melted off with residue in the tank, the carb was gummed up and so forth. I cleaned the saw up (ran with mix in carb), replaced the fuel line and cleaned and kitted the carb with new diaphragms and gaskets...

Wondering if there is a way to hide avatar pics without affecting other functionality? I'd like to be able to use the site without being embarrassed by someone looking over my shoulder and seeing the thong avatars and other risque pics.