Holiday Giving Thread

[XP_Slinger]

Some nice stuff bringing this thread back to life. Awesome

 

[Mycamaro_68]

View attachment 99337 Finally did a quick run through my hoard. Here are a few things to give away. Let me know if you want any of these. Please cover the shipping cost. First is a Woodland Pro 3/8 .050 72dl chain. Next is a 20" K041 mount with basically new .325 .050 78dl chain (only a few cuts made). And last is an 18" 3/8" .050 bar D176 mount.

I still have each of these left if anyone is interested.

Maybe everyone should re-post anything that they still have available?

*EDIT* All of these have been claimed.

 

[Red97]

046 or 460 semi ported cylinder. Appears to have exhaust/intake massaged. Base and squish appears to have been cut. I have never ran this cylinder looks plenty useable. Pm me stihl cylinder, names will be put in a hat. If I have more than 5 pm before midnight. Otherwise fist pm gets it.

Joe

Sent from my SM-G950U using Tapatalk

Only 4 interested. Getting sent to the first in line. @huskihl was quickdraw

 

[Cracker Boy]

Only 4 interested. Getting sent to the first in line. @huskihl was quickdraw

Well thats twice he was quickdraw and won.dang it i was 20 min first time and 10 this time.great gifts way to keep alive.

 

[Jon1212]

Well thats twice he was quickdraw and won.dang it i was 20 min first time and 10 this time.great gifts way to keep alive.

Breakfast Fingahs (@huskihl) is good like that.

 

[Cracker Boy]

Breakfast Fingahs (@huskihl) is good like that.

Lol i here ya no hard feelings. Oh well wasnt meant to be.

 

[EvilRoySlade]

Husqvarna 351/346 starter package. Crank rolls pretty good. Top cover ok, tank ok. No oiler flywheel etc. Same deal if I get more than 5 pm by midnight names will go in a hat.

Pm husky 351/346 in title.

Sent from my SM-G950U using Tapatalk

Joe, if I could have this I’d be happy.

I’ll come down and get it since you’re close. You just say when.

 

[acornhill]

I still have each of these left if anyone is interested.

Maybe everyone should re-post anything that they still have available?

I have a home for all 3 but I already have a gift coming, I will be posting my [emoji320] soon


Sent from my iPhone using Tapatalk

 

[sawmikaze]

Up for your viewing pleasure is this non running 028....its all yours.

It could keep your boat in place or a nice project...it has good bones.

View attachment 98724 View attachment 98726 View attachment 98725 View attachment 98727

Throw the shipping to me and it's all yours

@SawSeeker Did this show up yet

 

[PA Dan]

I have a 1117 recoil for an 042 or 048 up for grabs. I'll be running it through the ultrasonic and get it all cleaned up. If I could get help with shipping that would be great!

 

[SawSeeker]

@SawSeeker Did this show up yet

Yup! Thanks again buddy! Got her on the bench ready for diagnosis.

Sent from my SM-G935V using Tapatalk

 

[Red97]

Joe, if I could have this I’d be happy.

I’ll come down and get it since you’re close. You just say when.

I'll add your name to the hat.

Sent from my SM-G950U using Tapatalk

 

[Marshy]

I still have each of these left if anyone is interested.

Maybe everyone should re-post anything that they still have available?

I was keeping a list but if no one is willing to help keep the list going then Im not going to do it by myself. Lots of work some times when things get rolling.

I'll take the 72dl 3/8 chain if still available.

I only have one 20" chain for my 2159 and wrecked it cutting a log filled with dirt. It was a sad end to a new loop of square ground chain. Half of the tooth will need to be filed off to get back to where the chrome isn't worn off the top of the cutter. PM inbound. Thanks for your generosity.

 

[tickbitintn]

I have some stuffs to add but haven't been able to dig them out yet....
Trying to clean up/reorganize the shop to get the wood stove hooked back up....
I had an infection in my jaw from a poor job on a root canal....
Had oral surgery to remove said tooth and some infected bone yesterday....
There goes ten days I can't get back...


Sent from my XT1635-01 using Tapatalk

 

[XP_Slinger]

I have some stuffs to add but haven't been able to dig them out yet....
Trying to clean up/reorganize the shop to get the wood stove hooked back up....
I had an infection in my jaw from a poor job on a root canal....
Had oral surgery to remove said tooth and some infected bone yesterday....
There goes ten days I can't get back...


Sent from my XT1635-01 using Tapatalk

Dang...Hope you're feeling better man.

I'm going to search my barn again for something to post. It's tough when I don't keep everything that I don't use.

 

[kingOFgEEEks]

Anybody have need of small parts from a Stihl 261 or Husky 570? I have a couple of carcasses that are picked over, but might have what you need. PM me, and we can discuss.

 

[brandonstclair20]

046 or 460 semi ported cylinder. Appears to have exhaust/intake massaged. Base and squish appears to have been cut. I have never ran this cylinder looks plenty useable. Pm me stihl cylinder, names will be put in a hat. If I have more than 5 pm before midnight. Otherwise fist pm gets it.

Joe

Sent from my SM-G950U using Tapatalk

I would love to, but I have 3 ms460 projects and all 3 have good cylinders


Sent from my iPhone using Tapatalk

 

[Frank bierce]

Jon1212: NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
A set of 372 felling dawgs.(Gone)
A 404 063 SugiHara saddle tip.
A new low top filter for 362,365, 2165, 371, 372.(Gone)
NOS Oregon D176 Echo bar. 16" 3/8 050

Sty57 : tank & handle for a 359/357.
And a tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder
88cc Power productsmotor

Frank bierce: Cabela's multitool

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn: bar 20 inch 3003 mount .325 .063

Matt Ellerbee: crasftman 1.0 top handle (non runner)

Drptrch: three chains, .325 .063 74dl’s. (18”)

@Jon1212 looks like I can use that SUGI tip if it is still available. Looked at mine last night and it is 3/8

Cabelas multi tool has been claimed as well.

 

[moparnut88]

Anybody have need of small parts from a Stihl 261 or Husky 570? I have a couple of carcasses that are picked over, but might have what you need. PM me, and we can discuss.

Does that 261 have the 1/2 wrap handle? Got a project one here with a broken handle.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[kingOFgEEEks]

Jon1212: NOS Windsor MRA 660A9 tips, these are for the smaller Windsor RSN bars.(3)
A 404 063 SugiHara saddle tip.
NOS Oregon D176 Echo bar. 16" 3/8 050

Sty57 : tank & handle for a 359/357.
And a tank & top cover for a 450xt.

brandonstclair20: Husqvarna 445 cylinder with piston
Mcculloch power Mac 380 cylinder and piston
Husqvarna 44 cylinder
Smaller Mcculloch cart motor cylinder
88cc Power productsmotor

Marshy: Iron Age steel toe boots (uninsulated) made in US of A, size 14, 3E.

Johnmn: bar 20 inch 3003 mount .325 .063

Matt Ellerbee: crasftman 1.0 top handle (non runner)

Drptrch: three chains, .325 .063 74dl’s. (18”)

kingOFgEEEks: Raisman 16" (60 DL) 3/8 .050 chain
Misc. smalls or parts off of Stihl 261 or Husky 570 carcasses

PA Dan: 042 / 048 Recoil (Please help with shipping)

Red 97: Box o' 351/346 project

moparnut88: Pferd file handles - a couple sizes and multiple available

mycamaro68: 72 DL 3/8 .050 Woodland Pro (Claimed by Marshy?)
Oregon 20" K041 .325 .050 bar and chain
18" 3/8" .050 bar D176 mount

T. Roller: Free slap fight and maybe a Mac 797

If I'm missing something, or something above is gone, please copy and re-publish. If you add something, or something you've offered gets claimed please copy and add or subtract accordingly. I agree that it's starting to get confusing.