JONSERED Jonsereds

[Homelite410]

Is that a WH version?

Yes sir, but I pieced the heat onto it. My 2171 is as well!

 

[Motorhead]

My six thirty,Got the super 2 piston and 225 tillotson in her.

 

[WKEND LUMBERJAK]

Picked this up from Carl Miller. Seems to run very well 32" bar 404.

 

[Ronaldo]

Picked this up from Carl Miller. Seems to run very well 32" bar 404. View attachment 30615 View attachment 30616 View attachment 30617

I got to run one of those last year at the Spring GTG(belonged to our local sawmill owner,Virgil)and I was quite impressed. Serious torque and power!!!!
Good one, Kenneth.

 

[WKEND LUMBERJAK]

Mark it has some serious torque I've mad on cut with it. Got oiler working proper and need to sharpen chain.

 

[zero_sum]

Great saw.... One of my favorites. Whole lotta torque there.

 

[Heffalump]

Chicks love Jonsereds.....

 

[Ronaldo]

Clever!

 

[NorthcentralYooper]

First cut with my 2071 I recently restored.
I also added dual port muffler , ported cylinder and also a dominant piston.
It's a cutting fool so far !

 

[Czed]

Finally got a 920 in the guy did a topend rebuild several years ago for his dad but he passed and the saw was never used. lines looked good so he fired it up we ran it a few minutes but it stuck wide open and was hard to shut down no kill switch so I'm going through it new lines kit and everything he wants me to buy it but it has the odd bar size and parts are pricey but it does have great torque.

 

[ajschainsaws]

Did jonsereds ever make a direct equivalent to the husqvarna 242 or 42 special
As in later years there have been a few crossovers

 

[Jwalker1911]

Picked this bad boy up for the low,low price of free. Dumped out all the old stuff they called fuel,pulled the plug,shot a bit of mix in and filled the tank. Fired on the 3rd pull.

 

[Jwalker1911]

I'll get better pictures,my phone camera is crappy. Seems to run strong and I guess an 801 should and as you can see the oiler works great!

 

[SawTroll]

Did jonsereds ever make a direct equivalent to the husqvarna 242 or 42 special
As in later years there have been a few crossovers

No, that never happened - and they didn't have any other model in the same "class" either.

 

[ajschainsaws]

No, that never happened - and they didn't have any other model in the same "class" either.

Thanks for that

 

[Jwalker1911]

No, that never happened - and they didn't have any other model in the same "class" either.

Hi Sawtroll! Long time no see!

 

[SawTroll]

Thanks for that

Most of the time the 242/242xp was made there wasn't any "automatic" function that a Husky model lead to a Jonsered model, even though it happened - and in this case it never happened before the 242 was replaced by the 346 - and the Jonsered 2147.

 

[SawTroll]

Most of the time the 242/242xp was made there wasn't any "automatic" function that a Husky model lead to a Jonsered model, even though it happened - and in this case it never happened before the 242 was replaced by the 346 - and the Jonsered 2147.

Then there is the question of what Jonsered model was replaced by the 2147 - seen in retrospect there is little doubt that it was the 2055, despite an 8 cc difference (45.0 vs. 53.2).

 

[Jwalker1911]

Puttin it to the test

 

[exSW]

Finally got a decent bar for this thing.